9.2.2.2 Disable / Enable Wireless
Figure 77: Wireless SoftAP™ dialog box. Tools menu
From the Tools menu it is possible to disable the Wireless SoftAP™ by selecting Disable Wireless
(See figure 77). Once disabled the Wireless SoftAP™ dialog box will display "Station Mode –
Adapter Disabled" under Status as shown in figure 78 below.
Figure 78: Wireless SoftAP™ dialog box; Wireless Disabled
When wireless is disabled on your HP PC wireless connections will not be functioning nor
Note:
can they be established. Wireless must be enabled again in order to connect with other
wireless devices or to re-establish pre-set wireless connections.
Once disabled your Wireless LAN 802.11b/g Device can be re-activated through use of the
same menu as seen in Figure 79 below.
Wireless LAN 802.11b/g Device
74