Table of Contents
Advertisement
8.2.2.3 Change Admin Password...
SoftAP™ allows setting of an Admin password through the Tools menu as shown in figure 42
below.
By setting the Admin password any settings saved in the Tools menu under the options selection
become locked. It is necessary to enter the specified password in order to go to the options
selection in the Tools menu.
It is not necessary to enter the Admin Password to view Status or to change from AP Mode
Note:
to Station Mode.
Figure 42: Tools menu; Change Admin Password...
Important
If you loose your Admin Password refer to Appendix A: Troubleshooting.
Wireless LAN 802.11b/g Device
47
Advertisement
Table of Contents
