Vook VDT2304ME-BH User Manual
  1. Manuals
  2. Brands
  3. Vook Manuals
  4. DVR
  5. VDT2304ME-BH
  6. User manual

Vook VDT2304ME-BH User Manual

4/8/16-channel digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VOOK
DVR USER MANUAL
VDT23xxME-BH
For 4/8/16-channel digital video recorder
All rights reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VDT2304ME-BH and is the answer not in the manual?

Questions and answers

Related Manuals for Vook VDT2304ME-BH

Summary of Contents for Vook VDT2304ME-BH

  • Page 1 VOOK DVR USER MANUAL VDT23xxME-BH For 4/8/16-channel digital video recorder All rights reserved...
  • Page 2 VOOK DVR User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely.  We do not warrant all the content is correct. The contents of this manual are subject to change without notice.

  • Page 3: Table Of Contents

    VOOK DVR User Manual Table of Contents Introduction ..................................1 1.1 DVR Introduction ......................................1 1.2 Main Features ........................................ 1 Hardware Installation ............................... 4 2.1 Install Hard Drive ......................................4 2.2 Front Panel Instructions ....................................5 2.3 Rear Panel Instructions ....................................6 2.4 Remote Controller ......................................
  • Page 4 VOOK DVR User Manual 4.2.2 Main Monitor ....................................21 4.2.3 Spot ......................................... 22 4.2.4 Mask ........................................ 22 4.3 Record Configuration ....................................23 4.3.1 Enable ......................................23 4.3.2 Record Stream ....................................24 4.3.3 Time ........................................ 24 4.3.4 Stamp ....................................... 25 4.3.5 Recycle Record ....................................26 4.3.6 Snap .........................................
  • Page 5 VOOK DVR User Manual 4.7 User management Configuration ..................................38 4.8 P.T.Z Configuration ...................................... 40 4.9 Advanced ........................................42 4.9.1 Reset ........................................ 43 4.9.2 Import/Export ....................................43 4.9.3 Block/Allow List ....................................43 Search, Playback and Backup ............................44 5.1 Time Search ........................................ 44 5.2 Event Search .......................................
  • Page 6 VOOK DVR User Manual 7.1.1 On LAN ......................................52 7.1.2 On WAN ......................................52 7.2 Remote Surveillance through Apple PC ................................54 7.2.1 On LAN ......................................55 7.2.2 On WAN ......................................57 7.3 The Remote Live Preview ..................................... 58 7.4 Remote Playback & Backup ..................................61 7.4.1 Remote Playback ....................................

  • Page 7: Introduction

    VOOK DVR User Manual 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.,...
  • Page 8 VOOK DVR User Manual RECORD & PLAYBACK  Record modes: Manual, Schedule, Motion detection and Sensor alarm recording  Support recycle after HDD full  Resolution, frame rate and picture quality are adjustable  4 CH DVR supports full D1 real-time recording; 8 CH DVR supports 4D1+4CIF recording; 16 CH DVR supports full CIF real-time recording ...
  • Page 9 VOOK DVR User Manual  Support 1 administrator and 63 users.  Support event log recording and checking, events unlimited NETWORK  Support TCP/IP, DHCP, PPPoE, DDNS protocol  Support IE browser to do remote view  Support setup client connection amount ...

  • Page 10: Hardware Installation

    VOOK DVR User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please don’t power up until the physical installation is complete. 2.1 Install Hard Drive Notice: 1. This series DVR supports two SATA hard drive. Please use the hard drive the manufacturers recommend specially for security and safe field.

  • Page 11: Front Panel Instructions

    VOOK DVR User Manual 2.2 Front Panel Instructions Notice: The front panel descriptions are only for reference; please make the object as the standard. Item Type Name Description Power Power indicator, when connection , the light is blue When HDD is writing and reading , the light is blue...

  • Page 12: Rear Panel Instructions

    VOOK DVR User Manual Item Type Name Description To connect external USB devices like USB flash, USB HDD for backup or update firmware; USB port or connect to USB mouse POWER POWER Switch off 2.3 Rear Panel Instructions Fig 2-3 Rear Panel for 4-ch...
  • Page 13 VOOK DVR User Manual Item Name Description USB port Connect USB mouse or connect external USB devices DC12V Power supply Audio in 4 CH Audio input Video in Video input channels from 1-4 Audio out Audio output, connect to the sound box...
  • Page 14 VOOK DVR User Manual Item Name Description Network port USB port Connect USB mouse or connect external USB devices DC12V Power supply Audio in 4 CH Audio input Video in Video input channels from 1-8 Audio out Audio output, connect to the sound box...

  • Page 15: Remote Controller

    VOOK DVR User Manual Item Name Description VGA port VGA output, connect to monitor Network port USB port Connect USB mouse or connect external USB devices DC12V Power supply Audio in 4 CH Audio input Video in Video input channels from 1-16...
  • Page 16 VOOK DVR User Manual Fig 2-6 Remote Controller Button Function Switch off—to stop DVR. Use it before turning off the power Power Button Record Button To record manually -/-- /0-9 Digital Button Input number or choose camera Fn1 Button Unavailable temporarily...
  • Page 17 VOOK DVR User Manual Track Button To enter into track setting in PTZ mode Wiper Button To enable wiper function in PTZ mode Light Button To enable light function in PTZ mode Clear Button To return to the previous interface...

  • Page 18: Control With Mouse

    VOOK DVR User Manual 2.5 Control with Mouse 2.5.1 Connect Mouse It supports USB mouse through the ports on the rear panel. If mouse is not detected or doesn't work, check below steps: 1. Make sure the mouse is plugged in the USB mouse port not the USB port on the front panel 2.
  • Page 19 VOOK DVR User Manual Users can change some value by the wheel, such as time. Move cursor onto the value, and roll the wheel when the value blinks. It supports mouse drag. I.e. Set motion detection area: click customized, hold left button and drag to set motion detection area. Set...

  • Page 20: Basic Function Instruction

    VOOK DVR User Manual 3 Basic Function Instruction 3.1 Startup & Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your DVR.

  • Page 21: Login

    VOOK DVR User Manual Step2: Click OK. Then the unit will power off after a while. Step3: Disconnect the power. 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout.

  • Page 22: Live Playback

    VOOK DVR User Manual 3.4 Live Playback Click Play button to playback the record. Refer to Figure3-3. User can do complete operation by clicking the buttons on screen. Fig 3-3 Live Playback...

  • Page 23: Main Menu Setup Guide

    VOOK DVR User Manual 4 Main Menu Setup Guide Right click or press ESC button on the front panel to display the control bar on the bottom of the screen. Refer to Fig 4-1: Fig 4-1 Main Menu Toolbar Click the icon beside the screen mode to display a channel selection box.

  • Page 24: Basic Configuration

    VOOK DVR User Manual controller to display the main menu. Clicking Setup icon will pop up the configuration menu: Fig 4-2 Main Menu 4.1 Basic Configuration Basic configuration includes three sub menus: system, date & time and DST. 4.1.1 System Step1: Enter into MenuSetupBasicSystem tab ( please refer to Fig 4-3).

  • Page 25: Date & Time

    VOOK DVR User Manual Password check: If this option is enabled, the user would need to input the user name and the password for performing corresponding operations. Show time: If selected, the current time will be displayed during live monitoring.

  • Page 26: Live Configuration

    VOOK DVR User Manual Step3: Click “Default” button to restore default setting; click “Apply” button to save the setting; click “Exit” button to exit the current interface. Fig 4-5 Basic Configuration-DST 4.2 Live Configuration Live configuration includes four submenus: live, main monitor, spot and mask.

  • Page 27: Main Monitor

    VOOK DVR User Manual click “OK” button to save the setting. Step4: Select “All” to setup all channels with the same parameters. Fig 4-6 Live ConfigurationLive Fig 4-7 Live-Color Adjustment 4.2.2 Main Monitor Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 4-8: Step2: Select split mode: 1×1、2×2、2×3、3×3、4×4 and map the channel...

  • Page 28: Spot

    VOOK DVR User Manual 4.2.3 Spot Step1: Enter into MenuSetupLiveSpot tab. Refer to Fig 4-9: Step2: Select split mode: 1×1 and map the channel Step3: Set the dwell time. Step4: Select the split mode and then setup current picture group. Click button to setup the previous channel groups of dwell picture.

  • Page 29: Record Configuration

    VOOK DVR User Manual Setup Mask Area Live Image Mask Area 4.3 Record Configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-11:...

  • Page 30: Record Stream

    VOOK DVR User Manual Step2: Checkmark record and audio. Step3: Select All to setup the same settings for all channels. 4.3.2 Record Stream Step1: Enter into MenuSetupRecord Record Bitrate tab. Refer to Fig 4-12: Step2: Setup rate, resolution, quality, encode and max bit stream.

  • Page 31: Stamp

    VOOK DVR User Manual Pre-alarm record time: The record time prior to actual triggering of an alarm i.e. record time before motion detection or a sensor alarm was triggered. Post-alarm record: Set the post recording time after the alarm is finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.

  • Page 32: Recycle Record

    VOOK DVR User Manual Before Drag After Drag 4.3.5 Recycle Record This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records (FIFO, recycling space) and recycle the space if it is completely utilized. The setting steps are as follows: Step1: Enter into MenuSetupRecordRecycle Record tab.

  • Page 33: Motion

    VOOK DVR User Manual Step1: Enter into MenuSetupSchedule tab. Refer to Fig 4-15. Step2: Select channel and double-click to pop up a window as Fig 4-16. Now you can edit week schedule: Click “ ” button to add a certain day schedule; click “...

  • Page 34: Sensor

    VOOK DVR User Manual Fig 4-17 Schedule Configuration-Motion 4.4.3 Sensor This tab allows to setup schedule for sensor based recording. Step1: Enter into MenuSetupScheduleSensor tab. Refer to Fig 4-18: Step2: The setup steps for schedule for sensor based recording are similar to normal schedule setup (Refer to 4.4.1 Schedule for details).

  • Page 35: Sensor

    VOOK DVR User Manual 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. Operate the following steps to configure sensor alarm: Step1: Enter into MenuSetupAlarmSensorBasic interface. Refer to Fig 4-19: Step2: Enable channels by checking the checkboxes beside the desired channels.

  • Page 36: Motion

    VOOK DVR User Manual Email: If you select this option, the DVR will send an email alert to the preconfigured email address in case of a sensor based alarm from the particular input. Snap: If selected, the system will snap images of the checked channels on an alarm and save them in the HDD automatically.
  • Page 37 VOOK DVR User Manual Step3: The setup steps of motion trigger are similar to „Alarm Handling‟. You can refer to Chapter 4.5.1 Sensor Alarm Handling for more details. Step4: Click “Setting” button under the Area to display the following picture as shown in Fig 4-24: Step5: In the Area tab, you can drag slide bar to set the sensitivity value (1-8).

  • Page 38: Video Loss

    VOOK DVR User Manual 4.5.3 Video Loss Step1: Enter into MenuSetupAlarmVideo Loss tab. Refer to Fig 4-26: Step2: The setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling for more details.

  • Page 39: Alarm Out

    VOOK DVR User Manual 4.5.5 Alarm Out Alarm out includes three sub menus: alarm out, schedule and buzzer To setup alarm out: Step 1: Enter into MenuSetupAlarm out tab. Refer to Fig 4-28. Input relay name and hold time. Step 2: Select the Schedule tab. This will bring up the schedule setup tab. The setup steps for schedule for alarm out are similar to normal schedule setup;...

  • Page 40: Sub Stream

    VOOK DVR User Manual Step 3: Select the way to connect Internet. If you have a DHCP server running and would like your DVR to automatically obtain an IP address and other network settings from that server, check the checkbox beside "Obtain an IP address automatically".

  • Page 41: Email

    VOOK DVR User Manual Parameter Meaning Range from: 1-25 (PAL)/1-30(NTSC) Resolution Support CIF Quality The quality of the clients‟ image. The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. Encode...

  • Page 42: Server

    VOOK DVR User Manual 4.6.4 Server This function is mainly used for connecting ECMS. Step 1: In the server tab, select “enable” as shown in the Fig 4-32. Step 2: Check the IP address and port of the transfer media server in the ECMS. The default server port for auto report is 2009.
  • Page 43 VOOK DVR User Manual How to apply for a domain name?  Here we take www.dyndns.com for example. Step 1: Input www.dyndns.com in the IE address bar. Click ”Free Trial of DynDNS Pro””Start the trial” to register. Step 2: Input hostname, select service type and input your IP address. The picture is shown as follows: Step 3: Click “Add to cart”.

  • Page 44: User Management Configuration

    VOOK DVR User Manual Click” Create Account” button to create user account. After that, you shall provide your card number, card expiration and security code as well as billing address. Finally click “sign up for trial” button. Now, according to the domain name registration of “DDNS”，the domain name for DVR is “abc.dyndns.tv”, username is “bcd” and password is “123456”...
  • Page 45 VOOK DVR User Manual Step 1: Enter into MenuSetupUser management configuration. Refer to Fig 4-34: Step 2: Click Add button to display a dialog box as Fig 4-35: Step 3: In General tab, input username, password and select user type. You can also check „Binding PC MAC Address‟ and input this address.

  • Page 46: Configuration

    VOOK DVR User Manual 4.8 P.T.Z Configuration P.T.Z configuration includes two submenus: serial port and advanced settings. Serial port settings are as follows: Step 1: Enter into MenuSetup  P.T.Z Serial port tab. Refer to Fig 4-37: Step 2: Select “enable” and setup the value of address, baud rate and protocol according to the settings of the speed dome.
  • Page 47 VOOK DVR User Manual Advance settings are as follows: Step 1: Enter into MenuSetup P.T.Z Advanced tab. Refer to Fig 4-38: Step 2: In the Advanced tab, click preset “Setting” button to see a dialog box as Fig 4-39: Fig 4-38 P.T.Z Configuration-Advanced...

  • Page 48: Advanced

    VOOK DVR User Manual Step4: In the Advanced tab, while clicking cruise “Setting” button, a dialog box will pop-up as Fig 4-41: Click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup button to see a...

  • Page 49: Reset

    VOOK DVR User Manual 4.9.1 Reset Reset all settings the device will reboot. 4.9.2 Import/Export User can export the data files into mobile storage devices as backup function, and then import specified data files from mobile storage device to DVR.

  • Page 50: Search, Playback And Backup

    VOOK DVR User Manual 5 Search, Playback and Backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time Search Step1: Enter into MenuSearch Time Search tab. Refer to Fig 5-1: Fig 5-1 Time Search Step2: Select date and channels on the right hand side and press “Search”...

  • Page 51: Event Search

    VOOK DVR User Manual Step4: Select the channel display mode and click button to play record. Use the playback toolbar to control the playback. Playback Buttons Note: When the monitor resolution is set to VGA800*600, Part of the time search interface will be hidden. Click the “Expand to” button to expand the whole interface.

  • Page 52: File Management

    VOOK DVR User Manual Fig 5-2 Search Configuration-Event Search Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Step 3: Then checkmark Motion, Sensor or All accordingly. You can search for motion based recording and sensor based recording.

  • Page 53: Search By Image

    VOOK DVR User Manual Fig 5-3 Search Configuration-File Management 5.4 Search By Image Step 1: Enter into MenuSearchImage tab. Step 2: Select data and channels on the right hand side. Step 3: Press “Search” button to search for a recorded image.
  • Page 54 VOOK DVR User Manual Fig 5-4 Backup Configuration Step2: Set the start & end time, select channels and click Search button to display the searched data in the data backup list box Step3: Select a required file or checkmark “All” to select all data files. Click Backup button to display Backup information window.

  • Page 55: Manage Dvr

    VOOK DVR User Manual 6 Manage DVR 6.1 Check System Information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System Information In this tab, user can check the hardware version, MCU version, kernel version, device ID, etc.

  • Page 56: Record Information

    VOOK DVR User Manual the device for five minutes. . 6.1.6 Record Information In this tab, a user can check resolution, ftp and record status including sensor alarm recording, motion recording, manual recording or schedule recording. 6.2 Manual Alarm In this tab, user can check the relevant parameters of manual alarm.

  • Page 57: Upgrade

    VOOK DVR User Manual 6.4 Upgrade The DVR can be upgraded by using USB flash drive. Get the upgrading software from your vendor when there is a new software version. Upgrade Steps: Step 1: Copy the upgrade software which gets from vendor into the USB storage device Step 2: Connect the USB flash drive to the USB port.

  • Page 58: Remote Surveillance

    VOOK DVR User Manual 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform.
  • Page 59 VOOK DVR User Manual or domain name. Step 4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to FAQ Q8.

  • Page 60: Remote Surveillance Through Apple Pc

    VOOK DVR User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped.

  • Page 61: On Lan

    VOOK DVR User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network” Step 2: Enter into Network tab and then click “Ethernet Connected” to check the internet connection of Apple PC.
  • Page 62 VOOK DVR User Manual Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR‟s Main MenuSetupNetwork tab to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router.

  • Page 63: On Wan

    VOOK DVR User Manual the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit”...

  • Page 64: The Remote Live Preview

    VOOK DVR User Manual 7.3 The Remote Live Preview Fig 7-2 Remote Live Preview Symbol and function Definitions: Channel indicator Screen display mode Volume ① ② ③ Snapping picture Start IE record Start manual record ④ ⑤ ⑥ Bidirectional talk...
  • Page 65 VOOK DVR User Manual Note: Click button to record manual and the record file will be saved in user’s PC. Screen Display Mode: Clicking the icon beside the screen display mode, channel select dialog will appear as below: Take 16-channel DVR for example: user can checkmark channels form 1-ch to 16-ch at random to display the live pictures, 8 channels can be selected at most.
  • Page 66 VOOK DVR User Manual Please connect speed dome to the device via RS485 firstly, make sure the protocol of the speed dome is supported by the device and set the relative parameters manually. User can control the dome up, down, right, left or stop rotating on Control Center, adjust rotation speed, Iris and zoom, focus on the dome, and set the presets, etc.

  • Page 67: Remote Playback & Backup

    VOOK DVR User Manual Click the right mouse on the live interface. Then a pull-down menu will appear as below. Stream: This DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS(PAL)/30 FPS(NTSC)for every channel, but it needs higher network bandwidth simultaneously;...
  • Page 68 VOOK DVR User Manual Fig 7-5 Play Record File This DVR supports remote time search, event search and file management. By Time Search: Step1: Enter into Searchtime search. Refer to Fig 7-6:...
  • Page 69 VOOK DVR User Manual Fig 7-6 Time Search Step2: The highlight date in the area② indicates recorded data. Select the date in the area ② and record channels in area③. Step3: Click “Search” button. The record data will be displayed in the data information list box.
  • Page 70 VOOK DVR User Manual Fig 7-7 Playback By Time Search By Event Search: Step1: Enter into Searchevent search. Refer to Fig 7-8:...
  • Page 71 VOOK DVR User Manual Fig 7-8 Event Search Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: motion and sensor. Step 4: The events will be display in the event list box by clicking Search button.
  • Page 72 VOOK DVR User Manual Step 2: Select highlighted date and channels. Step 3: Click “Search” button to search the recorded files. Fig 7-9 File Management Lock: Select certain file item in the file list box and then click “Lock” button to lock this file that ca not be deleted or overlaid.

  • Page 73: Remote Backup

    VOOK DVR User Manual 7.4.2 Remote Backup Click Backup button to enter into backup interface. Please refer to Fig 7-10: Fig 7-10 Remote Backup Step1: Select channels, set the start and end time and then click “search‟ button to display the file information in the file list box.

  • Page 74: Remote System Configuration

    VOOK DVR User Manual 7.5 Remote System Configuration You can do remote setup of the device which includes functions like basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. You should select an option from the menu list on the left and then setup the relative parameters.

  • Page 75: Remote Management

    VOOK DVR User Manual also format the HDD remotely. 7.7 Remote Management The Info tab provides a web based interface to access the general information pertaining to the DVR‟s settings. It includes five submenus: System, Event, Log, Network and Online users. The sub menu list and the options in every menu are similar to that of the DVR. Please refer to Chapter 6 System information for more details.

  • Page 76: Mobile Surveillance

    VOOK DVR User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone，blackberry or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR.

  • Page 77: By Phones With Symbian Os

    VOOK DVR User Manual Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”: refer to the below picture on the right: Notice: User name password here are the same with that used on the DVR.
  • Page 78 VOOK DVR User Manual left: Step3：A welcome window will pop up and requires a package. Click the software name to download. Refer to the picture on the right: Step4：A security windows will pop up after downloading and ask whether to install the package. Click YES to install.

  • Page 79: By Phones With Iphone Os

    VOOK DVR User Manual Step10：In Live View, users can do snapshot, change channels and control PTZ. Refer to the picture on the right: 8.3 By Phones with iPhone OS 1. Install through iPhone Step 1: Open App Store function of iPhone.
  • Page 80 VOOK DVR User Manual Step 3: Click Superlive-pro, enter into “introduce” interface and then click “FREE”. Now, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”. Then the software will be installed automatically.
  • Page 81 VOOK DVR User Manual Note: If it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2. Install through PC Step 1: Install iTunes store in PC and then login...
  • Page 82 VOOK DVR User Manual Step 3: Enable “search” function to search “Superlive-Pro” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Checkmark “synchronously apply program” and “Superlive-pro”, and then click “apply” button...
  • Page 83 VOOK DVR User Manual Login interface Enter server‟s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. Main Interface Image view...
  • Page 84 VOOK DVR User Manual Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub To enter into the next interface To return to the previous interface...
  • Page 85 VOOK DVR User Manual Playback Click icon to enter into the playback interface. Then click „Search‟ button, select the time and channel to playback and click button. Now you can see the local file list. Select a file and click play button to playback. You can also copy or delete the file. Finally, click „Close‟...
  • Page 86 VOOK DVR User Manual Server list Click button to enter into server list interface. You can click icon to add a server list. After you add the list, you can click icon to edit the server information and click icon to delete this server information.

  • Page 87: By Phones With Android Os

    VOOK DVR User Manual Click icon to enter into information view interface. You can check the information of system, network and online users. In the system interface, you can see the information of device name, device ID, hardware version, MCU version and so on. In the network interface, you can see the information of http port, server port, IP address, gateway, network status, etc.
  • Page 88 VOOK DVR User Manual Step 3: Press “Install” button Step 4: Click “OK” button Step 5: User can view the download and install process in notifications; Finished downloading, the software will install automatically. Login...

  • Page 89: Main Menu

    VOOK DVR User Manual Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. Main menu playback record file image view 【Playback】...

  • Page 90: Record Playback

    VOOK DVR User Manual Stop playing Single channel display Screen mode Four channels display Snap Talk Record Live audio Hide Image view The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete Record playback...

  • Page 91: Server List

    VOOK DVR User Manual Play/Pause Stop Fast forward Slow play Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select the record file and click it to playback. Finally, click „Return‟ button to return to the previous interface.

  • Page 92: Information View

    VOOK DVR User Manual Audio alarm enabled, when Video Loss/Sensor/Motion happen ， sound alarm will be Alarm setting triggered; If shake Alarm is enabled, when Video Loss/Sensor/Motion happen ， shake alarm will be triggered. User can setup the relevant parameters of mobile video.

  • Page 93: By Phones With Blackberry Os

    VOOK DVR User Manual 8.5 By Phones with BlackBerry OS Installation instruction for BlackBerry Mobile phone Client  1. Open the browser of BlackBerry phone and enter sever address 2. Click “Supercam” to link 3. Click “Download” button on the popup interface and the download progress will be shown.
  • Page 94 VOOK DVR User Manual Check whether DVR server connect network normally or not. Modify the option of Browser Configuration. (1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure on the left. (2) Enter into Menu->Option->Cache Operations, clear up browser cache. Refer below picture on the right: When user used the Supercam software in mobile phone with touch screen, there will be compatible problem.
  • Page 95 VOOK DVR User Manual Main interface Playback playback record file Image image view log record Server List device list device information software help center Information Help view logoff and return to software setting Logoff Settings login interface Live live view...
  • Page 96 VOOK DVR User Manual Note: User can click Return button on the Blackberry phone to return the previous interface. Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen...
  • Page 97 VOOK DVR User Manual Software configuration Information view...

  • Page 98: Appendix A Faq

    VOOK DVR User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c.
  • Page 99 VOOK DVR User Manual a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle.
  • Page 100 VOOK DVR User Manual Fig 8-1 Fig 8-2 Q9: How to deal with when DVR starts, it displays “please wait…”all the time First possible reason: hard-disk cable and data cable are not well connected. Solution: Please check the connection of hard-disk cable and data cable and make sure they are well connected; If still not working, please unplug them and then try re-plugging again;...
  • Page 101 VOOK DVR User Manual small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use the digital keys in the front panel, or the digital keys on the remote controller. Q11: Why is the hard disk used in a DVR identified a new hard disk if directly used to another same type DVR? And why must we format it again? When DVR only uses one hard disk, the hard disk removed from one to another same type DVR can work normally without format.
  • Page 102 VOOK DVR User Manual a. Enter Control PanelUser Account and Family Safety  User Account Control(refer to below picture); click Turn User Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b. Right click IE browser (refer to Fig 13-2), select Run as administrator to run browser.
  • Page 103 VOOK DVR User Manual After you install it, open this player and click “Open Path” button to open your backup file. Next, click play button to play the backup file. Double click the image and then right click to enable audio. If you save your backup files in AVI format, you can directly...

  • Page 104: Appendix B Calculate Recording Capacity

    VOOK DVR User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.

  • Page 105: Appendix C Compatible Devices

    VOOK DVR User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand Capacity 512MB, 1G, 2GB Netac Kingston Aigo Smatter vider SanDisk 2. Compatible HDD list Brand Capacity Seagate Barracuda LP ST3200542AS Seagate Barracuda 7200.11 ST31500341AS 1.5T Seagate SV35.3 ST31000340SV...

  • Page 106: Appendix D 4-Ch Specifications

    VOOK DVR User Manual Appendix D VDT2304ME-BH Specifications Compression format Standard H.264 Composite：1.0V p-p/75Ω BNC×2 , VGA×1，HDMI×1 Video output Composite：1.0V p-p/75Ω BNC×4 Video input HDMI/VGA Resolution 1920*1080/1280*1024 / 800*600 Record Resolution 352*288/704*576 (PAL), 352*240/704*480(NTSC) Display Frame Rate 100FPS (PAL), 120FPS (NTSC)

  • Page 107: Appendix E 8-Ch Specifications

    VOOK DVR User Manual Appendix E VDT2308ME-BH Specifications Compression format Standard H.264 Composite：1.0V p-p/75Ω BNC×2 , VGA×1，HDMI×1 Video output Composite：1.0V p-p/75Ω BNC×8 Video input HDMI/VGA Resolution 1920*1080/1280*1024 / 800*600 Record Resolution 352*288/704*576 (PAL), 352*240/704*480(NTSC) Display Frame Rate 200FPS (PAL), 240FPS (NTSC)

  • Page 108: Appendix F 16-Ch Specifications

    VOOK DVR User Manual Appendix F VDT2316ME-BH Specifications Compression format Standard H.264 Video output Composite：1.0V p-p/75Ω BNC×2, VGAX1, HDMI×1 Video input Composite：1.0V p-p/75Ω BNC×16 VGA Resolution 1920*1080/1280*1024 / 800*600 Record Resolution 704*576/352*288 (PAL), 704*480/352*240(NTSC) Display Frame Rate 400FPS (PAL), 480FPS (NTSC)
  • Page 109 VOOK...

This manual is also suitable for:

Vdt2308me-bhVdt2316me-bh

Table of Contents