Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Vook VDT2708XD-M
Summary of Contents for Vook VDT2708XD-M
-
Page 1: Digital Video Recorders
VOOK VOOK HD-SDI Digital video recorders VDT2708XD-M ; VDT2716XD-M... - Page 2 VOOK...
-
Page 3: Hardware Installations
VOOK 8/16-CH DVR Quick Start Guide 1. Hardware installations 1.1 Install Hard Drive Notice: 1.This series support eight SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate HDD capacity according to the recording setting. - Page 4 VOOK 8/16-CH DVR Quick Start Guide 2.1 Rear view for 8-ch DVR HD SDI video signal inputs. Connect to speed dome. Y is TX+, Z is TX- Alarm Inputs for connecting CVBS output sensors Connect high-definition Audio output, connect to the sound box...
-
Page 5: Setup Wizard
VOOK 8/16-CH DVR Quick Start Guide 3. Startup &Shutdown 3.1 Startup Step1: Connect to cameras and monitor. Step2: Connect with the source power; Step3: The device will boot and the power indicator will display blue. Step4: A WIZZARD window will be pop-up. - Page 6 VOOK 8/16-CH DVR Quick Start Guide It supports digits, alphabets and symbols as inputs. Click Shift button to input Capital letters and symbols; click Shift button again to return. Click „Next‟ button to bring up a network setup window.
-
Page 7: Main Menu Setup
VOOK 8/16-CH DVR Quick Start Guide 5. Login After you exit the wizard setup, you can login to the DVR. Notice: This DVR can only display options on either VGA/HDMI monitor or BNC monitor at a given point of time, if there is live image display without menu options，please check if there is display on other device/monitor, or long press... -
Page 8: Recording Setup
VOOK 8/16-CH DVR Quick Start Guide and sensor alarm respectively. Alarm configuration: Users can set sensor type, alarm trigger and buzzer alarm. Network configuration: Users enable network function, and configure IP address, DDNS, transmission video parameters here. User configuration: Administrator can add, delete users, and change their... -
Page 9: Motion Based Recording
VOOK 8/16-CH DVR Quick Start Guide delete the selected schedule; Step 3: You can also double-click the grid to pop up a week schedule window. Select day and then click „Add‟ button to setup the start time and end time. Then select other days and click „Copy‟... -
Page 10: Sensor Based Recording
VOOK 8/16-CH DVR Quick Start Guide detection area. Click icon to test the sensitivity as per the local conditions. Once motion is sensed, it displays a figure icon. Click icon to save the setting. Click icon to exit the current interface Step 5: Enter into MenuSetupAlarmMotionSchedule tab to bring up... -
Page 11: Live Playback
VOOK 8/16-CH DVR Quick Start Guide schedule setup. You can refer to 7.2 Schedule Recording for details. Note: The timelines of the two schedules must match, otherwise you cannot get the record in some time. 8. Playback This unit supports four kinds of playback... -
Page 12: Playback By Event Search
VOOK 8/16-CH DVR Quick Start Guide Step 2: Select date and channels on the right hand side and press “Search” button. A date with highlighted borderline indicates presence of data. Step 3: Set the start time by clicking a particular grid or by entering the specific value in the start time field. -
Page 13: Remote Surveillance
VOOK 8/16-CH DVR Quick Start Guide Step 3: Press “Search” button to search for a recorded image. Step 4: Once an alarm image has been identified, the user can double click the image to play the recording. You can lock the image by clicking “Lock” button. Click “Save” button to copy the image on the HDD. - Page 14 VOOK 8/16-CH DVR Quick Start Guide ● Enter into Record Setup to set network video parameters like resolution, frame rate etc. ● Open IE on a computer on the same network. Input the IP address of the DVR in IE address bar and press enter. If HTTP port is not 80, add the port number after IP address.
- Page 15 VOOK 8/16-CH DVR Quick Start Guide „Apply‟. The DVR will connect to the server and would give a confirmation message. ● If users want to utilize dynamic domain name, please apply for a domain name in a DNS server supported by the DVR or router. Then add to the DVR or router.
Need help?
Do you have a question about the VDT2708XD-M and is the answer not in the manual?
Questions and answers