1. Manuals
  2. Brands
  3. Vook Manuals
  4. DVR
  5. VDT2424MD-H
  6. User manual

Vook VDT2424MD-H User Manual

H.264 24/32-channel digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DVR User Manual
For H.264 24/32-channel digital video recorder
All rights reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VDT2424MD-H and is the answer not in the manual?

Questions and answers

Related Manuals for Vook VDT2424MD-H

Summary of Contents for Vook VDT2424MD-H

  • Page 1 DVR User Manual For H.264 24/32-channel digital video recorder All rights reserved...
  • Page 2 CAUTION  Please read this user manual carefully to ensure that you can use the device correctly and safely  The contents of this manual are subject to change without notice  This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.

  • Page 3: Table Of Contents

    DVR User Manual Table of Contents 1 Introduction ..............................1 1.1 DVR Introduction ..................................1 1.2 Main Features..................................1 2 Hardware Installation ............................. 4 2.1 Install Hard Drive &DVD Writer ..............................4 2.1.1 Install Hard Drive ........................................4 2.1.2 Install DVD ..........................................6 2.2 Front Panel Descriptions .................................
  • Page 4 DVR User Manual 4.2 Live configuration .................................. 20 4.2.1 Live ............................................. 20 4.2.2 Main monitor ........................................21 4.2.3 Spot ............................................. 22 4.2.4 Mask ........................................... 22 4.3 Record configuration ................................23 4.3.1 Enable ..........................................23 4.3.2 Record stream ........................................24 4.3.3 Time ............................................ 24 4.3.4 Stamp ..........................................
  • Page 5 DVR User Manual 4.6.4 Other settings ........................................37 4.7 User management configuration............................40 4.8 P.T.Z configuration ................................. 42 4.9 Advanced ....................................45 4.9.1 Reset ..........................................45 4.9.2 Import/Export ........................................45 4.9.3 Block/Allow list ........................................45 5 Record search & playback and backup ......................46 5.1 Time search ...................................
  • Page 6 DVR User Manual 7.1.1 On LAN ..........................................53 7.1.2 On WAN ..........................................53 7.2 Remote Surveillance through Apple PC ..........................55 7.2.1 On LAN ..........................................56 7.2.2 On WAN ..........................................58 7.3 The remote live preview interface ............................59 7.4 Remote playback & backup ..............................62 7.4.1 Remote playback ........................................

  • Page 7: Introduction

    DVR User Manual 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., ensuring powerful functions and high stability.
  • Page 8 DVR User Manual • Support built-in SATA DVD writer to backup • Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK • Record modes: Manual, Schedule, Motion detection and Sensor alarm recording •...
  • Page 9 DVR User Manual manual record, playback, PTZ control and remote live view • Support 1 administrator and 63 users. • Support event log recording and checking, events unlimited NETWORK • Support TCP/IP, DHCP, PPPoE, DDNS protocol • Support IE browser to do remote view •...

  • Page 10: Hardware Installation

    DVR User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1.
  • Page 11 DVR User Manual Install other three HDD according to above-mentioned method. Then cover the upper iron bar and screw it firmly. Put the Step 3: HDD under it and screw firmly as shown below: Step 4: Install other three HDD under the upper iron bar as shown below:...

  • Page 12: Install Dvd

    DVR User Manual 2.1.2 Install DVD Step 1: Unscrew and open the case. Then unscrew the screws in the both sides to take out of the upper iron bar as shown below: Step 2: Install the DVD holder attached with the device. Please let the screw holes of the DVD aim at the holder’s. Try to place the holder farther away from the front and then screw firmly.

  • Page 13: Front Panel Descriptions

    DVR User Manual Front Panel Descriptions Notice: The front panel descriptions are only for reference; please make the object as the standard. Name Item Function Power Button Soft switch off to stop firmware running. Do it before power off. DVD button Press this button, user can place the DVD to do backup.

  • Page 14: Rear Panel Instructions

    DVR User Manual Name Item Function BACKUP Enter backup mode in live SEARCH Enter search mode Function Rewind button Fast forward Record manually Play/Pause Stop/Esc / Esc Jog dial Control rewind/fast forward/frame when playing the image. To connect external USB devices like USB flash, USB HDD for USB port backup or update firmware;...
  • Page 15 DVR User Manual Fig 2.2 Rear Panel for 32-Channel Item Name Description Video out Connect to monitor Video input channels(from 1-24 for 24-ch DVR/ 1-32 for Video in 32-ch DVR) POWER INPUT AC 110Vor 110V Connect to monitor as an AUX output channel by channel. Spot Only video display, no menu show Audio out...

  • Page 16: Remote Controller

    DVR User Manual Item Name Description ALARM OUT 4ch relay output. Connect to external alarm. Connect to speed dome Connect to keyboard Audio in 16 CH Audio input POWER Switch on/off SWITCH For cooling the device 2.4 Remote Controller It uses two AAA size batteries and works after loading batteries as following: Step1: Open the battery cover of the Remote Controller Step2: Place batteries.
  • Page 17 DVR User Manual Fig 2.3Remote Controller Item Name Function Power Button Soft switch off to stop firmware running. Do it before power off. INFOR Button Get information about the DVR like firmware version, HDD information REC Button To record manually Digital Button Input digital or choose camera Multi Screen Button...

  • Page 18: Control With Mouse

    DVR User Manual Item Name Function AUDIO Button To enable audio output in live mode Auto Dwell Button To enter auto dwell mode BACKUP Button To enter backup mode To control PTZ camera: Move camera/ZOOM/FOCUS/IRIS/SPEED PTZ Control Button control Operation processes with remote controller to control multi-DVR The device ID of the DVR is 0.

  • Page 19: Use Mouse

    DVR User Manual 2. Change a mouse to try. 2.5.2 Use Mouse In live: Double-click left button on one camera to be full screen display. Double-click again to return to the previous screen display. Click right button to show the control bar at the bottom of the screen. Here are all control and setup. Click right mouse again to hide the control bar.

  • Page 20: Basic Function Instruction

    DVR User Manual 3 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.1 Power on Step1: connect with the source power; then switch on the power button near the power port on the rear panel. Step2: the device will be loaded, and the power indicator will display blue.

  • Page 21: Login

    DVR User Manual 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: the default user name and password is “admin” and 123456. The concrete operation steps for change password, add or delete user please refer to User management configuration for more details.

  • Page 22: Live Playback

    DVR User Manual 3.3.1 Live playback Click Play button to playback the record. Refer to Figure3-3. User can do concrete operation by click the buttons on screen. Fig 3-3 live playback...

  • Page 23: Main Menu Setup Guide

    DVR User Manual 4 Main menu setup guide From the live screen, right click or press ESC button on the front panel to display the control bar at the bottom of the screen, refer to Fig 4-1: Fig 4-1 main menu toolbar Click the icon beside the screen display mode to display a channel select dialog.

  • Page 24: Basic Configuration

    DVR User Manual display Login window. Input the user name and password to logon the system interface as shown in Fig 4-2. To see the main menu, press MENU button on the front panel or operate with remote controller. Clicking Setup icon will pop-up the configuration menu: Fig 4-2 system setup 4.1 Basic configuration Basic configuration includes three sub menus: system、date&...

  • Page 25: Time & Date

    DVR User Manual Password check: If enabled, the user would need to input the user name and the password for performing corresponding operations. Show time: display time in live. Show wizard: if this item is selected, there will display an opening wizard with time zone and time setup information Max network uses: set the max user amount of network connection VGA resolution: the resolution of live display interface, range from: VGA800*600, VGA1024*768, VGA1280*1024 and CVBS Note：When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor.

  • Page 26: Dst

    DVR User Manual 4.1.3 DST Step1: enter into system configurationbasic configurationDST; refer to Fig 4-5: Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Fig 4-5 basic configuration-DST 4.2 Live configuration Live configuration includes four submenus: live, main monitor, Spot and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast.

  • Page 27: Main Monitor

    DVR User Manual Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort default setting; click “OK” button to save the setting. Step4: user can setup all channels with same parameters, tick off “all”...

  • Page 28: Spot

    DVR User Manual 4.2.3 Spot Step1: enter into system configurationlive configurationSpot; refer to Fig 4-9: Step2: select split mode: 1×1and channel. Step 3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display Step 4: while selecting the split mode, user can setup the current picture group.

  • Page 29: Record Configuration

    DVR User Manual Setup mask area live image mask area 4.3 Record configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: enter into system configurationrecord configurationenable; refer to Fig 4-11: Step2: tick off record, audio and record time Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.

  • Page 30: Record Stream

    DVR User Manual 4.3.2 Record stream Step1: enter into system configurationrecord configurationrecord bit rate; refer to Fig 4-12: Step2: setup rate, resolution, quality, encode and max bit stream Step3: user can setup all channels with same parameters, tick off “All”, then to do relevant setup. Note: if the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.

  • Page 31: Stamp

    DVR User Manual Post-alarm record: set post recording time after the alarm is finished, options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s. Expire time: the hold time of saved records. If the set date is overdue, the record files will be deleted automatically. Step2: user can setup all channels with same parameters, and then tick off “all”...

  • Page 32: Recycle Record

    DVR User Manual Before drag after drag 4.3.5 Recycle record Step1: enter into system configurationrecord configurationrecycle record; Step2: tick off recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding when HDD is full; if user disenables this function, it will stop recording when HDD is full. Step3: click “default”...

  • Page 33: Motion

    DVR User Manual Fig 4-15 schedule configuration-schedule Step2: select channel and double-click to pop up a dialog box as Fig 4-16. Now user can edit week schedule: Fig 4-16 schedule-week schedule ① Click “add” button to add a certain day schedule; click “delete” button to delete the selected schedule; Copy: user can copy the specify schedule to other dates.

  • Page 34: Sensor

    DVR User Manual Fig 4-17 schedule configuration-motion Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue. 4.4.3 Sensor Step1: enter into system configurationschedule configurationalarm; refer to Fig 4-18: Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details.

  • Page 35: Sensor

    DVR User Manual 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule. ① Basic Step1: enter into system configurationalarm configurationsensorbasic; refer to Fig 4-19: Step2: enable sensor alarm and then set the alarm type according to triggered alarm type. Two option: NO and Step3: user can setup all channels with same parameters, tick off “all”...

  • Page 36: Motion

    DVR User Manual Step 3: If Buzzer is selected, there will be triggered buzzer alarm out. Full screen alarm: when alarm is triggered, there will pop up full screen alarm; Email: Select this function. When an alarm is triggered, a notification email will be sent to user’s designed email box including trigger events, time, snap pictures, device name, ID camera name etc.
  • Page 37 DVR User Manual Step 2: enable motion alarm and set alarm hold time which means time interval between two adjacent detective motions. If there is other motion detected during the interval period, it is considered continuous movement; otherwise, it will be considered that those two adjacent detective motions are two different motion events.

  • Page 38: Video Loss

    DVR User Manual Note: when users drag mouse to set motion detection area, they have to click icon to clear all set detection area firstly, and then make the operation. Step 6: user can setup all channels with same parameters. ②...

  • Page 39: Other Alarm

    DVR User Manual Fig 4-26 alarm configuration-video loss 4.5.4 Other alarm Step1: enter into system configurationother alarm; refer to Fig 4-27: Disk full: user can choose the capacity of the disk storage and select the related alarm. If the disk is full, the system will alarm according to the setup.

  • Page 40: Alarm Out

    DVR User Manual information on the lower right of the live image. 4.5.5 Alarm out Alarm out includes three sub menus: alarm out, schedule and buzzer ① Alarm out Step 1: enter into system configurationalarm out; refer to Fig 4-28: Step 2: in this interface, user can set relay alarm out name and select hold time which means the interval time between the two adjacent alarms.

  • Page 41: Sub Stream

    DVR User Manual Server port: communication port. Step 3: If user selects the "Obtain an IP address automatically", the device will distribute IP address, subnet mask, and gateway IP and DNS server. Step 4: enable PPPoE to directly connect the DVR to internet via ADSL, and then input the user name and password.

  • Page 42: Email

    DVR User Manual Definitions and descriptions of Sub stream: Parameter Meaning Range from: 1-25 Resolution Support CIF Quality The quality of the clients’ image. The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. Encode VBR and CBR Max bit rate...

  • Page 43: Other Settings

    DVR User Manual 4.6.4 Other settings Step 1: enable DDNS server: user needs to input user name， password and host domain name of the registered website, click TEST to test the effectiveness of the relevant information. Step 2: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
  • Page 44 DVR User Manual If “Show icons for networked UPnP devices” can’t display in the “Network Tasks” list box, please follow the below operation:  Click “Tools”-- “Folder options”  Select the “Show common tasks in folders” in the “Tasks” check box to display the UPnP icon. 1．...
  • Page 45 DVR User Manual After user fill in the blank, click “Add to cart”. Then Dynamic DNS Hosts dialog box will be displayed. Next, create user account. For example, the username is “bcd”, password is “123456”. Click” Create Account” button to create user account. 2．...

  • Page 46: User Management Configuration

    DVR User Manual （2） Username and password According to the above registration, username is “bcd”. According to the above registration, password is “123456” 3． Application Connect DVR to the Network Client. ① Enter into Main menuNetworkother settings, tick off DDNS, select “Dyndns” at the DDNS Sever pull down list box and input user name and password.
  • Page 47 DVR User Manual Fig 4-33 user management configuration Fig 4-34 add-general ① General: Input user name, password; select user type: normal and advance, input the MAC address of the PC; click OK button. Then this user will be added into the user list box; click Exit button to exit the current interface. Note: when the default value of binding PC MAC address is 0, the user is not bind with the specify computer;...

  • Page 48: Configuration

    DVR User Manual 4.8 P.T.Z configuration P.T.Z configuration includes two submenus: serial port and advance ① Serial port Step 1: enter into system configuration  P.T.Z configurationserial port; refer to Fig 4-36: Step 2: tick off Enable and then setup the value of address, baud rate and protocol according to the settings of the speed dome.
  • Page 49 DVR User Manual Fig 4-37 P.T.Z configuration-advance Fig 4-38 advance-preset setting a. in the preset set interface, while clicking Setting button, a dialog will pop-up as Fig 3-39: Fig 4-39 preset set-setting b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the rotate speed and the value of zoom, focus and iris of the dome;...
  • Page 50 DVR User Manual Fig 4-40 cruise set a. click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup button to see a dialog box as Fig 4-41: b.

  • Page 51: Advanced

    DVR User Manual a. user can control the dome rotates up, up left, down, right down, left, left down, right and up right and stop rotating; adjust the rotate speed and the value of zoom, focus and iris of the dome; click Start Record button to record the move track of PTZ; click this button again can stop record;...

  • Page 52: Record Search & Playback And Backup

    DVR User Manual 5 Record search & playback and backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time search Step1: enter into Search configurationtime search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: To search a record select date and channels on the right hand side and press the ‘Search’...

  • Page 53: Event Search

    DVR User Manual Note: the vertical column means hours, horizontal column means channels. Step4: click Play button to playback record; click the relevant buttons on the screen to do operation: Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button, click this button, the whole interface can be expanded.

  • Page 54: File Management

    DVR User Manual Step 2: while clicking Search button, the searched event information will displayed in the event list box. User can select date, channel and tick off Motion, Sensor or All accordingly. Step 3: double check a certain record file to playback. Note: when the monitor resolution is VGA800*600, the event search interface will appear a hide button, click this button, the whole interface can be expanded.

  • Page 55: Image

    DVR User Manual Delete: select an unlocked file and click Delete button to delete this file. Step 3: After clicking “All”, user can lock/unlock or delete all files in the file management column. Step 4: double click an unlocked item to playback. Note: when the monitor resolution is VGA800*600, the file management interface will appear a hide button, click this button, the whole interface can be expanded.
  • Page 56 DVR User Manual Fig 5-4 backup configuration...

  • Page 57: Manage Dvr

    DVR User Manual 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event information In this interface, user can check record events according to the set date.

  • Page 58: Disk Management

    DVR User Manual 6.3 Disk management Format the disk Step1: enter into disk management interface Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space, and total space show OM at the bottom of screen. Step2: click Refresh button to refresh the disk information of the list box;...

  • Page 59: Remote Surveillance

    DVR User Manual Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR’s Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
  • Page 60 DVR User Manual This unit supports www.dns2p.com，www.meibu.com，www.dyndns.com，and www.no-ip.com. Step 5: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name. Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view.

  • Page 61: Remote Surveillance Through Apple Pc

    DVR User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon and select “Show in Finder”.

  • Page 62: On Lan

    DVR User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network”...
  • Page 63 DVR User Manual Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC. Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC.

  • Page 64: On Wan

    DVR User Manual Step 5: Click icon and then select the Active X control, the welcome interface will be shown. Click “Continue””Install” button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser.

  • Page 65: The Remote Live Preview Interface

    DVR User Manual 7.3 The remote live preview interface ① ② Channel Screen display indicator mode ③ ④ Volume Snapping picture ⑤ ⑥ Start manual Start IE record record ⑦ ⑧ Bidirectional Playback talk ⑩ ⑨ Color PTZ control ⑪ Master/sub stream status Fig 7-2 Remote live preview interface Note: click...
  • Page 66 DVR User Manual Drag the slide bar to adjust Brightness, Contrast, Hue, and Saturation. Click Default to reset them to original value. Buttons Description Drag the scroll bar to adjust the brightness of channel Drag the scroll bar to adjust the contrast of channel Drag the scroll bar to adjust the saturation of channel Drag the scroll bar to adjust the hue of channel Click this button to recover the default value of brightness, contrast, saturation...
  • Page 67 DVR User Manual 'Zoom' button. Click button near 'Zoom' button to zoom in the locale picture of this camera. Click button near 'Zoom' button to zoom out the locale picture of this camera. 'Focus' button. Click button near 'Focus' button to have long focus. Click button near 'Focus' button to have short focus.

  • Page 68: Remote Playback & Backup

    DVR User Manual Enable audio: enable or disenable audio Full screen: In the full screen status, the live preview picture will display with full screen, the tool bar will be hided; double click left mouse or click right mouse to return Zoom in: Single channel large screen electronic amplification Left click the channel which needs to amplify;...
  • Page 69 DVR User Manual This DVR supports remote time search, event search and file management. By Time Search: Step1: Enter into Searchtime search; refer to Fig 7-5: Fig 7-5 time search interface Step2: click “Search” button. The record data will be displayed in the data information list box; the highlight date in the area② means have record data;...
  • Page 70 DVR User Manual research, etc. refer to Fig 7-6: Fig 7-6 Time search playback By Event Search: Step1: Enter into Searchevent search; refer to Fig 7-7:...
  • Page 71 DVR User Manual Fig 7-7 event search interface Step2: click the highlight date, select record channels and then tick off the event type: motion and sensor, click “search” button Step3: the events will be display in the event list box. Double-click a certain item to playback.
  • Page 72 DVR User Manual File Management Step1: Enter into Searchfile management; refer to Fig 7-8: Fig 7-8 file management interface Lock: select certain file item in the file list box and click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file and click “unlock”...

  • Page 73: Remote Backup

    DVR User Manual 7.4.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-9: Fig 7-9 remote backup interface Step1: select channels, set the start and end time, and then click “search’ button. The file information will be displayed in the file list Step2: select backup files, click “browse”...

  • Page 74: Remote System Configuration

    DVR User Manual 7.5 Remote System configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters. When one user setup parameters of a certain item, others cannot setup this one.

  • Page 75: Remote Management

    DVR User Manual 7.6 Remote Management Remote Information Search The system will automatically record the working condition and operation process during the period of work. User can view information, such as username, IP address and so on. Enter into INFO→Log, user can set the start time to view the log record as follows: Fig 7-11 Remote information search Note: There may be subtle differences with respect to functions of remote surveillance between through IE and through...

  • Page 76: Mobile Surveillance

    DVR User Manual Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone，blackberry or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration.

  • Page 77: By Phones With Symbian

    DVR User Manual Step5：Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully. Refer below picture in the left: Step6：Camera 1 is the default channel after login.
  • Page 78 DVR User Manual Symbian S60 5 Edition-Symbian OS v9.4 support Symbian S60 5.1 Edition-Symbian OS v9.5 support Step1：Firstly enable the network access on mobile phone. Then run Web browser. Step2：Input the DVR server’s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Refer picture in the left: Step3：A welcome window will pop up and requires a package.
  • Page 79 DVR User Manual Step8：Input the server’s address, ID and password respectively. Then save. Notice: About Access point, there may be different access points in different countries or from service providers. Step9：Enter Live View, it will connect the server and display pictures. Refer picture in the left: Notice: User name and password here are the same with that used on the DVR.

  • Page 80: The Software Installation For Iphone Mobile Clients

    DVR User Manual 8.3 The Software installation for iPhone mobile clients 1. Install through iphone. Step 1. Open App Store function of iphone Step 2. Enable “search” function to search “SuperCam” Step 3: Click SuperCam, enter into “introduce” interface and then click “FREE”. It will change into “INSTALL”...
  • Page 81 DVR User Manual Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2.
  • Page 82 DVR User Manual Step 3: Enable “search” function to search “SuperCam” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button...
  • Page 83 DVR User Manual Operation Instruction for SuperCam (iphone) Login interface Enter server’s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. Main Interface 【Playback】...
  • Page 84 DVR User Manual Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap picture Record Close the video of the current channel Live audio Switch to the single image Switch to four images Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ...
  • Page 85 DVR User Manual Image view interface, refer below picture in the left: Record Playback interface, refer below picture in the right: Click the record file to playback. Server list Interface, refer to below picture in the left: Config interface, refer to below picture in the right: Main parameters for mobile phone video config...

  • Page 86: The Installation & Operation Methods For Android Mobile Clients

    DVR User Manual Record file clip size: Single video size. When the video size is greater than setup value, change another video files Reserved disk space: Reserved SD Card disk space, when the disk space is less than setup value, the video will be stopped Display config：...
  • Page 87 DVR User Manual Step 1: run Google Market program Step 2: search”SuperCam” Step 3: press “Install” button Step 4: click “OK” button...
  • Page 88 DVR User Manual Step 5: user can view the download and install process in notifications. Finished downloading, the software will install automatically. Login Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
  • Page 89 DVR User Manual 【Playback】 playback record file 【Image】 image view 【Log】 【Server List】 device list log record 【Live】 live view 【Settings】 software setting 【Information】 device information view 【Help】 software help center 【Logoff】 logoff and return to login interface Live view （Fig 2）...
  • Page 90 DVR User Manual Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotates the PTZ Zoom In/Focus In/Iris Add...
  • Page 91 DVR User Manual Record playback Play/pause Full screen stop Return to record file interface (Fig 3) （Fig 3） （Fig 4） Click the record file (Fig 3) to playback (Fig 4) Server list Config interface...
  • Page 92 DVR User Manual ， Alarm setting Tick Sound Alarm when Video Loss/Sensor/Motion happen，trigger sound alarm; Tick Vibrate Alarm, when Video Loss/Sensor/Motion happen，trigger vibrate alarm Storage setting User can setup the relevant parameters of mobile video. This function can be valid only insert SD card.

  • Page 93: Installation And Operation Methods For Blackberry Mobile Phone Client

    DVR User Manual 8.5 Installation and operation Methods for BlackBerry Mobile phone Client 8.5.1 Installation instruction for BlackBerry Mobile phone Client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4.
  • Page 94 DVR User Manual Note: If the software fails to download, please check in accordance with the following steps: Check whether the network of mobile phone is normal or not Check whether DVR server connect network normally or not Modify the option of Browser Configuration. (1) Enter into Menu->Option->Browser Configuration referring to the following figure in the left.

  • Page 95: Operation Method For Blackberry Mobile Phone Client

    DVR User Manual 8.5.2 Operation method for Blackberry mobile phone client Login Enter server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. Main interface Playback playback record file...
  • Page 96 DVR User Manual Note: User can click Return button on the Blackberry phone to return the previous interface.
  • Page 97 DVR User Manual Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub...
  • Page 98 DVR User Manual Software configuration Information view...

  • Page 99: Appendix A Faq

    DVR User Manual Appendix A Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c.
  • Page 100 DVR User Manual Q6. Cannot record a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to Record Configuration. Chang a new HDD or enable recycle. d.
  • Page 101 DVR User Manual ② select Security------Custom Level….Refer to Fig 8-1 ③ Enable all the sub options under “ActiveX controls and plug-ins” refer to Fig 8-2 ④ Then click ok to finish setup. b. Other plug-ins or anti-virus block ActiveX. Please uninstall or close them. Fig8-1 Fig8-2 Q9: How to deal with when DVR starts, it displays “please wait…”all the time...
  • Page 102 DVR User Manual First possible reason: hard-disk cable and data cable are not well connected. Solution: Please check the connection of hard-disk cable and data cable and make sure they are well connected; If still not working, please unplug them and then try re-plugging again; Second possible reason: It is forced to stop because hard disk has disabled track which causes the system checking hard disk cannot skip Solution: Change another new hard disk or reformat the broken one...
  • Page 103 DVR User Manual 512M NVIDIA GeForce MX440/FX5200 ATIRADEON 7500/X300 Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA DirectX Q13: What are the PC configurations for 16-ch real time product with fully open channel mainstream? PC Module Parameters Intel Core(TM)2 Duo CPU E4600 Motherboard G31/P31 chip GMA3100/NVIDIA GeForce 8400/...
  • Page 104 DVR User Manual b. Right click IE browser (refer to Fig 14-2), select Run as administrator to run browser.

  • Page 105: Appendix B Calculate Recording Capacity

    DVR User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings. Resolution Frame Rate Video Quality...

  • Page 106: Appendix C Compatible Devices

    DVR User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand Capacity 512MB, 1G, 2GB Netac Kingston Aigo Smatter vider SanDisk Tab C.1 Compatible USB drive 2. Compatible SATA CD/DVD writers after test Brand Model TECLAST GH22NP20/TL-22XD BENQ DW220S-0K4 LITEON...

  • Page 107: Appendix D 24-Ch Dvr Specifications

    DVR User Manual 3. Compatible HDD list Seagate Barracuda LP ST3200542AS 2TB support Seagate Barracuda 7200.11 ST31500341AS 1.5T support Seagate SV35.3 ST31000340SV 1T support Seagate Pipeline HD.2 500G support Seagate Barracuda 7200.10 320G support Seagate Barracuda 7200.10 ST3250310AS 250G support Seagate Barracuda 7200.11 ST3160813AS 160G support...

  • Page 108: Appendix D 32-Ch Dvr Specifications

    DVR User Manual VDT2424MD-H VDT2424MD-H 24-CH Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2, VGAX1 Video Input Composite：1.0V p-p/75Ω BNC×24 VGA Resolution 1280*1024 /1024*768/ 800*600 Record Resolution 352*288/704*576 (PAL), 352*240/704*480(NTSC) Display Frame Rate 600FPS (PAL), 720FPS (NTSC)
  • Page 109 VDT2432MD-H DVR User Manual VDT2432MD-H 32-CH Specifications Compression format Standard H.264 Baseline Video output Composite：1.0V p-p/75Ω BNC×2, VGAX1 Video Input Composite：1.0V p-p/75Ω BNC×32 VGA Resolution 1280*1024 /1024*768/ 800*600 Record Resolution 352*288/704*576 (PAL), 352*240/704*480(NTSC) Display Frame Rate 800FPS (PAL), 960FPS (NTSC) Record Frame Rate 800 (PAL), 960 (NTSC) Audio Input...
  • Page 110 450011220001...

This manual is also suitable for:

Vdt2432md-h

Table of Contents