Qos Dscp Egressremap; Qos Storm Unicast - Planet Networking & Communication WGSD-10020HP User Manual

Default Setting:
disable

QoS DSCP EgressRemap

Description:
Set or show DSCP egress remap table. This table is used if the port egress remarking mode is 'remap' and the purpose is
to map the DSCP and DP level to a new DSCP value.
Syntax:
QoS DSCP EgressRemap [<dscp_list>] [<dpl_list>] [<dscp>]
Parameters:
<dscp_list>: DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all'
<dpl_list> : DP level list or 'all', default: All DP levels (0-1)
: Egress remapped DSCP: 0-63, BE, CS1-CS7, EF or AF11-AF43
<dscp>

QoS Storm Unicast

Description:
Set or show the unicast storm rate limiter.
Syntax:
QoS Storm Unicast [enable|disable] [<packet_rate>]
Parameters:
: Enable unicast storm control
enable
: Disable unicast storm control
disable
<packet_rate>: Rate in fps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 32768k)
Default Setting:
disable
Example:
Enable unicast storm control in 2fps
WGSD-10020HP:/> QoS Storm Unicast enable 2
User's Manual of WGSD-10020 Series
488