Planet Networking & Communication WGSD-10020HP User Manual page 194

8-port gigabit + 2 100/1000x sfp managed switch
Table of Contents

Advertisement

 Any
 Ethernet
 LLC
 SNAP
 IPv4
 IPv6
3.
LLC
4.
SNAP
5.
IPv4
6.
IPv6
Note: all frame types are explained below.
Allow all types of frames.
Ethernet Type Valid ethernet type can have value within 0x600-0xFFFF or 'Any'
but excluding 0x800(IPv4) and 0x86DD(IPv6), default value is 'Any'.
SSAP Address Valid SSAP(Source Service Access Point) can vary from 0x00 to
0xFF or 'Any', the default value is 'Any'
DSAP Address Valid DSAP(Destination Service Access Point) can vary from
0x00 to 0xFF or 'Any', the default value is 'Any'
Control Address Valid Control Address can vary from 0x00 to 0xFF or 'Any', the
default value is 'Any'
PID Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any',
default value is 'Any'
Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP Specific Source IP address in value/mask format or 'Any'. IP and Mask
are in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and
255. When Mask is converted to a 32-bit binary string and read from left to right,
all bits following the first zero must also be zero
DSCP Diffserv Code Point value(DSCP): It can be specific value, range of value
or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or
AF11-AF43
IP Fragment IPv4 frame fragmented option: yes|no|any
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable
for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP IPv6 source address: (a.b.c.d) or 'Any', 32 LS bits
DSCP Diffserv Code Point value(DSCP): It can be specific value, range of value
or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or
AF11-AF43
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable
for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
194
User's Manual of WGSD-10020 Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgsd-10020

Table of Contents