Planet Networking & Communication WGSD-10020HP User Manual page 181

The page includes the following fields:
Object
 Schedule Mode
 Queue Shaper Enable
 Queue Shaper Rate
 Queue Shaper Unit
 Queue Shaper Excess
 Queue Scheduler
Weight
 Queue Scheduler
Percent
 Port Shaper Enable
 Port Shaper Rate
Figure 4-9-6 QoS Egress Port Schedule and Shapers page screenshot
Description
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this
switch port.
Controls whether the queue shaper is enabled for this queue on this switch port.
Controls the rate for the queue shaper. The default value is 500. This value is
restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to 1-3300
when the "Unit" is "Mbps".
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The
default value is "kbps".
Controls whether the queue is allowed to use excess bandwidth.
Controls the weight for this queue. The default value is "17". This value is
restricted to 1-100. This parameter is only shown if "Scheduler Mode" is set to
"Weighted".
Shows the weight in percent for this queue. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
Controls whether the port shaper is enabled for this switch port.
Controls the rate for the port shaper. The default value is 500. This value is
User's Manual of WGSD-10020 Series
181