Symphony/Symphony-I Led Operation; Leds During Normal (Idle) State - ADEMCO Symphony Installation And Setup

Symphony/Symphony-i Installation and Setup Guide

Symphony/Symphony-i LED Operation

Your Symphony/Symphony-i has four LEDs that are labeled: WEB (yellow), ARMED (red),
READY (green), and MESSAGE (yellow). The status of each of these LEDs indicates specific
operational states. These states are:
•
Normal (idle)
•
Software download
•
Software download - Failure Modes
Each LED can have four different status indications: ON, OFF, FAST BLINK, and SLOW
BLINK. All LEDs do not use all of the above states. Details are provided below.

LEDs During Normal (Idle) State

LED
WEB
ARMED
READY
8-14
ACTION
ON – Connected to Internet.
OFF – Not connected.
FAST BLINK – Either sending or receiving data.
SLOW BLINK – Connecting to server (BB) or dialing to RAS server (DU).
ON – Security system is armed.
OFF – Security system is not armed.
ON – Security system is disarmed and ready to arm.
OFF – Security system is disarmed but not ready. Faults/troubles present.
SCREEN
NOTE: If no touch is made within 5 seconds,
No Touch Detected.. Try Again. is displayed
in the center of the Touch Screen Calibration
screen.
DESCRIPTION