Section 6 User Codes; Introduction To User Code Setup; How To Access User Setup - ADEMCO Symphony Installation And Setup

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦

Introduction to User Code Setup

♦

How to Access User Setup

♦
How to Add a User
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Introduction to User Code Setup
Each user must be assigned a name with a corresponding 4-digit user code in order to gain
access to various features and functions. Through Symphony/Symphony-i, you may program
users to access any and all of the following systems:
•
Fire/Burglary
•
Internet
Users for the systems are programmed in a central user setup location that provides the
specific questions for the user pertaining to each system. You may want these users to be
the same, but there are situations in which you may want a user to have access to one
system (e.g., Internet) without having access to another (e.g., the Fire/Burglary system).
How to Access User Setup
Access User Setup as follows:
SCREEN
S E C T I O N
User Codes
ACTION
1. From the "Home" screen, press the
SECURITY button. The "Arming" screen is
displayed.
6
6-1