Performing Diagnostics; Lcd Display Test - ADEMCO Symphony Installation And Setup

Performing Diagnostics

Select any diagnostic test or calibration procedure from the Diagnostics screen by pressing
its associated Test or Calibrate button. All or any individual test may be run when you
access the Diagnostics screen; however, each test must be performed one at a time.
At any time when a test is not being performed, you can press:
•
the back button icon at the upper-right corner of the Diagnostics screen to return to the
previous screen, or
•
the home button icon in the upper left-hand corner of the Diagnostics screen to return to
your home page.
Once the Diagnostics screen is exited, subsequent entry to this screen displays all test options as
"Not Performed."

LCD Display Test

Perform the LCD Display Test as follows:
SCREEN
SCREEN
Section 8: Troubleshooting
ACTION
ACTION
1. When you press the Test button associated
with the LCD Display Test, a pop-up
"Confirmation Window" is displayed in the
center of the screen with an all green
background. Within the Confirmation Window
the question "Is Screen Background Green?"
is displayed.
8-3