How To Select System Options; How To Set The Night Setup Button Function - ADEMCO Symphony Installation And Setup

How to Select System Options

The system options allow you to place buttons on the "Home" screen. The SECURITY
button is always displayed and cannot be removed. Buttons that can be added are Lighting,
Heating/Cooling (DEMO only), and Video (DEMO only). To avoid confusion to the user, only
buttons whose options are functional in the system should be displayed. To select the system
options, do the following:

How to Set the NIGHT Setup Button Function

The NIGHT button can be set to arm the system in one of four arming modes:
•
Away - When selected, arms all zones with entry delay.
•
Stay - When selected, arms perimeter zones with entry delay.
•
Instant - When selected, arms perimeter zones without entry delay.
•
Maximum - When selected, arms all zones without entry delay.
SCREEN ACTION
1. On the "Central Station" screen press the
Options button. A pop-up window is
displayed with options for selecting Lighting
and/or Internet.
2. Select the options that the system will have.
For example, select Lighting if the system will
have the lighting function installed. Select all,
none, or any combination of options.
NOTE: Heating/Cooling and Video are
provided for demonstration purposes only.
Press the DONE button to accept the setting.
Symphony/Symphony-i returns to the "Central
Station" menu screen.
Section 4: Initial Setup
4-13