Audio Test - ADEMCO Symphony Installation And Setup

Section 8: Troubleshooting

Audio Test

Perform the Audio Test as follows:
SCREEN ACTION
When you press the Test button associated
with the Audio Test "Testing.." is displayed
(yellow) in the test status column on the
"Diagnostics" screen while beeps sound from
the speaker. At the conclusion of the test, a
pop-up "Confirmation Window" is displayed in
the center of the "Diagnostics" screen.
Within the Confirmation Window the question
"Did you hear Beep?" is displayed.
When you press the Yes button, a green
"Passed." indication is displayed in the test
status column on the "Diagnostics" screen.
When you press the No button, a red "Failed."
indication is displayed in the test status
column on the "Diagnostics" screen.
8-7