Symphony/Symphony-i Installation and Setup Guide
How to Change the Address on Additional Symphony/Symphony-i Units
After enabling additional addresses in the control panel using the Symphony/Symphony-i set
to address 1, power up each additional Symphony/Symphony-i one at a time, and set its
address to one of the addresses you enabled in the control panel. If this is a first time power-
up of the unit, follow the initialization procedure in Section 4. Otherwise, access the Central
Station screen, then follow the procedure to change the address on the unit.
How to Access the Central Station Screen
To Access the "Central Station" screen perform the following:
4-10
SCREEN
ACTION
1. Press the SECURITY button on the "Home"
screen. The "Arming" screen is displayed.
2. Press the MORE CHOICES button. The
"More Choices" screen is displayed.
3. Press the SETUP button on the "More
Choices" screen. The "Setup" screen is
displayed.