Setting Up An Account Number - ADEMCO Symphony Installation And Setup

Setting up an Account Number

After the touch screen has been calibrated, the boot process will continue until the Set
Account # window is displayed. This account number is required for Internet content and
remote control. It is not required for code update. Set the account number as follows:
SCREEN ACTION
1. Press the box next to the Master Central
Station ID. The Enter Data keyboard is
displayed.
NOTE: The Central Station IDs are provided
by the Central Station or by AlarmNet.
2. Press the Clear button to delete any
previous account information (typically set to
FFFF from the manufacturer). The text box at
the top of the Enter Data keyboard is cleared
with the cursor in the first position.
Section 4: Initial Setup
4-3