Led Test - ADEMCO Symphony Installation And Setup

Symphony/Symphony-i Installation and Setup Guide

LED Test

Perform the LED Test as follows:
8-8
SCREEN ACTION
1. When you press the Test button associated
with the LED Test, "Testing.." is displayed
(yellow) in the test status column on the
"Diagnostics" screen while the 4 LEDs light
sequentially, left to right (amber, red, green,
green), 5 times. At the conclusion of the test,
a pop-up "Confirmation Window" is displayed
in the center of the "Diagnostics" screen.
2. Within the Confirmation Window the
question "Did you see chasing LED pattern?"
is displayed.
If you press the Yes button, a green "Passed."
indication is displayed in the test status
column on the "Diagnostics" screen.
If you press the No button, a red "Failed."
indication is displayed in the test status
column on the "Diagnostics" screen.