How To Setup Alarmnet-I Connectivity - ADEMCO Symphony Installation And Setup

Symphony/Symphony-i Installation and Setup Guide

How to Setup AlarmNet-i Connectivity

AlarmNet-i is an available option. Set up Symphony/Symphony-i for AlarmNet-i, following
the steps below. Note that the Symphony/Symphony-i connectivity parameter must be set to
Ethernet. AlarmNet-i is not supported using dial-up.
4-18
SCREEN
SCREEN
ACTION
12. Record the Phone Number displayed.
Press the box in which the phone number is
displayed. A data entry screen appears.
Enter [ 9 ] + [ , ] + the recorded phone number.
Press OK on the data entry screen, then press
the Save button on the PPP Login
Information screen.
Press the Save button. The configuration is
saved and the Save button changes to Save
Done. Restart the system.
ACTION
1. From the "Home" screen, press the
SECURITY button. The "Arming" screen is
displayed.