Nikon D300 Complete Manual page 630

Hide thumbs Also See for D300:

Table of Contents

d. Use the Direction pad to navigate to

e. You must set two things for each participating

I guess Comp. is supposed to stand for "compensation." But that's not quite

accurate. If a flash is set to TTL, Comp. sets flash exposure compensation for that

flash. If a flash is instead set to M (Manual), Comp. sets the power level (1/1 = full,

1/2 = half, etc.) for that flash.

Thom Hogan's Complete Guide to the Nikon D300

Mode setting.

Commander mode. Press the > key to enter

the settings.

flash: the flash mode it'll use (Mode) and the

flash output level (Comp.

fill-in-boxes with the < and > keys on the

Direction pad; you set value in the boxes with

the " and % keys on the Direction pad.

i. For each flash (internal, Group A,

Group B), set the flash mode. You can

set TTL, AA (not for internal flash), M,

or --. The last item, --, means that this

flash or Group will not participate in

). You navigate to

Troubleshooting