Commissioning - Siemens Multi Panel MP270 SIMATIC HMI Equipment Manual

Commissioning

Flowchart
The following information on commissioning explains the individual steps which
need to be taken to start up the MP270. Figure 3-1 illustrates the most important
steps for the initial startup, recommissioning and normal operation of the MP270.
Initial startup
There is no configuration
available in the MP270.
Download configuration data to the MP270
PC/PU
COM1/2
Figure 3-1 Commissioning flowchart
MP270 Equipment Manual
Release 01/99
Recommissioning
The MP270 already contains
a configuration but needs to
operate with a different one.
Switch on the MP270's power supply.
During the start-up phase, switch the
MP270 to download mode (refer to
Page 3-3)
MP270
Start screen
3
Normal operation
The MP270 is operated with
the configuration which is
currently loaded.
3-1