Specifying The Ver/Hor Base Reference Points - SATO GL4 Series Operator's Manual

3.4 USER MODE (CONT'D)

3.4.5 Specifying the Ver/Hor Base Reference Points

The Vertical or Horizontal Base Reference Point defines the origin
0,0 of a label (Reference Point).
Press the ^ and v cursor keys to change the value in Dots, to the
desired quantity. The range of legal values that can be set here is dependent on the print head
resolution of your GL printer, and the width of label used.
Press the ENTER button to confirm the setting and proceed to the next screen.
GL Series Operator's Manual
Section 3: Configuration and Operation
Ver BaseRefPoint
0 dots*
Page 3-7