SATO GL4 Series Operator's Manual page 54

Section 3: Configuration and Operation
Software Build
Hex Dump Mode
FLASH Installed
DRAM Installed
Printer Usage
PrintHead Usage
Head Type
Head Voltage
Page 3-22
NA
Enable/Disable Disable
NA
NA
NA
NA
NA
NA
This is the reference number which includes
the program file part number and
revision number of the software installed in
the printer, e.g., 358186 V1.07G.
If enabled, this option prints out data sent
from the host in hexadecimal format.
Displays the amount of FLASH memory
installed in megabytes.
Displays the amount of DRAM installed in
megabytes.
Displays the length of media actually printed
since the last Reset Head Data operation.
This value is set to zero at the factory after
burn-in testing.
Displays the length of media actually printed
since the last Reset Head Data operation.
This value is set to zero at the factory after
burn-in testing.
Displays the print head resolution available,
in Dots Per Inch.
Displays the print head voltage being
applied
GL Series Operator's Manual