Victory Motorcycles 2005 Ness Signature Series Kingpin Owner's Manual page 114

Clutch
Adjust Clutch Cable Freeplay
1. Remove the right side cover.
2 Hold cable (1) and loosen the adjuster jam nut (2).
3 Turn cable adjuster (3) while holding cable.
4 Turn the cable adjuster in or out until the clutch freeplay (A) is
.020-.040 inch (.5-1.0 mm).
5 Tighten the adjuster jam nut securely while holding cable.
6. Reinstall right side cover.
7. Verify that the safety switch activates so the motorcycle cannot
be started in gear with clutch lever released.
NOTE: The starter interlock switch is dependent on the clutch lever
freeplay being set correctly to ensure activation of the clutch safety
switch.
MAINTENANCE
1
2
3
A
111