3. Recording Modes
Functions that work automatically
∫
•
The following functions are performed automatically to allow the camera to make the optimal
settings.
–
Scene Detection
–
Backlight Compensation
–
[Face/Eye Detection]
–
Auto White Balance
–
Intelligent ISO sensitivity control
–
[Red-Eye Removal]
–
[i.Resolution]
–
[i.Dynamic]
–
[Long Shtr NR]
–
[Shading Comp.]
–
[Quick AF]
–
[AF Assist Lamp]
Auto Focus, Face/Eye Detection , and Face Recognition
∫
The Auto Focus Mode is automatically set to [š]. If you touch the subject, the AF tracking
function will work. The AF tracking function will also work if you press 2 and then press
the shutter button halfway.
(About tracking AF, refer to
•
When [
], [
], or [
focus, while the exposure will be optimized for the face.
In Intelligent Auto Plus Mode or Intelligent Auto Mode, you cannot change
the eye in focus. ([Face/Eye Detection])
•
During AF Tracking, Scene Detection does not work until the subject is
locked.
•
When [Face Recog.] is set to [ON], and the face similar to the registered face is detected, [R] is
displayed in the top right of [
About the flash
∫
When the external flash is turned off, it will be set to [Œ]; when it is turned on, it will be set
to [
] (Auto).
When the external flash is turned on, the camera automatically sets the flash to [
(Auto Red-Eye Reduction), [
subject.
•
For information on how to attach an external flash, refer to P203.
•
When [
] or [
] is set, Red-Eye Removal is enabled.
•
Shutter speed will be slower during [
•
Remove the external flash when not taking pictures with it.
P144
for details.)
] is set, an eye closer to the camera will be in
], [
] and [
] or [
], depending on the type and brightness of the
] or [
].
].
77
], [
]