Table of Contents
Advertisement
6. Shutter and Drive Settings
•
The burst speed may become slower depending on the following settings.
–
[Picture Size] (P131)/[Quality] (P132)/[Sensitivity] (P162)/Focus Mode (P139)/[Focus/
Release Priority]
•
Burst speed can also be set with [Burst Rate] in the [Rec] menu.
•
Refer to
P132
4
Focus on the subject and take a picture.
•
Hold down the shutter button fully to activate the Burst
Mode.
∫
Canceling the Burst Mode
Select [
] ([Single]) or [
Focusing in Burst Mode
The way focus is achieved varies according to the focus mode
[Focus/Release Priority]
Focus mode
[AFS]
[AFF]/[AFC]
¢1
[MF]
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
(P152)
for information about RAW files.
] from among the drive modes.
(P152)
setting in the [Custom] menu.
[Focus/Release
Priority]
[FOCUS]
[RELEASE]
[FOCUS]
[RELEASE]
—
At the first picture
Normal focusing
Predicted focusing
Focus set with Manual Focus
170
4:3
AFS
AFS
H H
L
60 i
(P168)
(P139)
setting and the
Focus
¢2
¢3
Advertisement
Table of Contents
