Table of Contents
Advertisement
5. Focus and Brightness (Exposure) Settings
Highlighting/not highlighting in-focus portions
>
[Custom]>[Peaking]
MENU
In-focus portions are highlighted with color.
[ON]
In-focus portions are not highlighted.
[OFF]
[Detect Level]
[SET]
•
When [Peaking] is set, [
be displayed.
•
Each time [
] in [
>
[LOW]
[Detect Level]
)
[ON] (
•
Each time the set function button is pressed when [Peaking] is set to [Fn Button Set]
the [Custom] menu, the peaking setting switches in order of [ON] (
[Detect Level]
[ON] (
•
This function works in Manual Focus or when focus is being adjusted manually with [AF+MF].
•
Since portions with clear outlines on the screen are highlighted as in-focus portions, portions to
be highlighted vary depending on the recording conditions.
•
The color used for highlighting does not affect recorded images.
•
[Peaking] does not work with [Rough Monochrome] in Creative Control Mode.
The detection level for in-focus portions is set.
When [HIGH] is set, portions to be highlighted are
reduced, allowing you to achieve a more precise focus.
[HIGH]/[LOW]
•
The detection level setting does not affect the focus range.
Sets the highlighting color used for [Peaking].
•
When [Detect Level] is set to [HIGH]: [
(Yellow)/[
•
When [Detect Level] is set to [LOW]: [
[Display
(Orange)/[
•
Color]
Changing the [Detect Level] setting also changes the
[Display Color] setting as follows.
– [
] (Light blue)
– [
] (Yellow)
– [
] (Green)
] ([Detect Level]: [HIGH]) or [
] is touched, the setting is switched in order of [ON] (
[HIGH]
:
[HIGH]
) > [OFF].
:
] (Green)
] (White)
[
[
] (Orange)
[
] (White)
>
)
[OFF].
158
] (Light blue)/[
] (Blue)/[
] (Blue)
] ([Detect Level]: [LOW]) will
[Detect Level]
[Detect Level]
[LOW]
:
]
]
:
(P64)
in
) >
Advertisement
Table of Contents
