2. Getting Started/Basic Operations
Enabling/disabling the touch operation
>
[Custom] > [Touch Settings]
MENU
•
When set to [OFF], no corresponding touch tab or touch icon is displayed on the screen.
[ON]
[Touch Screen]
[
[OFF]
Operation to display the touch icons by touching tabs such as [ ] displayed
[Touch Tab]
on the right of the screen.
[ON]/[OFF]
Operation to optimize the focus or both the focus and brightness for a
[Touch AF]
touched subject.
[AF] (P145)/[AF+AE] (P149)/[OFF]
Operation to move the AF area by touching the monitor when the viewfinder
[Touch Pad AF]
is in use.
[EXACT]/[OFFSET]/[OFF]
•
Touch the screen with the clean and dry finger.
•
If you use a commercially available monitor protection sheet, please follow the instructions that
accompany the sheet.
(Some monitor protection sheets may impair visibility or operability.)
•
Do not press on the monitor with hard pointed tips, such as ball point pens.
•
Do not operate with your fingernails.
•
Wipe the monitor with dry soft cloth when it gets dirty with finger prints and others.
•
Do not scratch or press the monitor too hard.
•
For information about the icons displayed on the touch screen, refer to
"
Viewfinder Display
Not available in these cases:
•
The touch screen may not function normally in the following cases.
–
When touched by a gloved hand
–
When touched by a wet hand (water or hand cream, etc.)
–
When the touch screen is wet
–
When you use a commercially available monitor protect sheet
–
When touched by multiple hands or fingers at the same time
All touch operations.
Sets a part of the touch screen to a non-touch-sensitive area.
Touch operations in the area will be disabled. Please note that
]
except when recording images, all touch operations can be
performed.
Enables only button and dial operations.
(P148)
on P326.
54
"
Monitor Display/