Table of Contents
Advertisement
2. Getting Started/Basic Operations
Interchangeable Lens (H-X015)
∫
•
Before attaching the lens hood, make sure to remove the lens cap. The lens hood cannot
be attached unless you remove the lens cap.
1
Rotate the decoration ring
the arrow to remove it.
2
Align the mounting index
with the mark on the tip of the lens.
3
Rotate the lens hood in the direction of the
arrow until it clicks into place, and align the
stop position
C
index on the tip of the lens.
Attaching the decoration ring
∫
•
Before attaching the decoration ring, make sure to remove the lens cap.
1
Align the mounting position
decoration ring with a position approximately
90x away from the lens fitting mark
decoration ring into place.
2
Rotate the decoration ring in the direction of
the arrow to align the mounting position
the decoration ring with the lens fitting mark
.
E
A
in the direction of
on the lens hood
B
on the lens hood with the
on the
D
to fit the
E
D
on
35
Advertisement
Table of Contents
