5. Focus and Brightness (Exposure) Settings
Selecting the Auto Focus Mode
Applicable modes:
This allows the focusing method that suits the positions and number of the subjects to be
selected.
1
Press 2 (
2
Press 2/1 to select AF Mode and then
press [MENU/SET].
([Face/Eye
Detection])
([Tracking])
[
]
([23-Area])
).
The camera automatically detects the person's
face and eyes.
An eye closer to the camera will be in focus, while
the exposure will be optimized for the face.
(When [Metering Mode] is set to [
•
Up to 15 faces can be detected. Eyes that can be detected are only
those of the face that is in focus.
•
You can change the eye to be in focus.
•
Position and size of the AF area can be changed.
The camera focuses on the subject you specify.
The exposure will be optimized for the subject.
(When [Metering Mode] is set to [
Focus and exposure will keep on following the
subject even if it moves. (Dynamic tracking)
Up to 23 AF areas can be focused.
This is effective when a subject is not in the center
of the screen.
•
You can select areas to be in focus.
])
(P143)
].)
(P146)
141
(P146)
(P144)