Table of Contents
Advertisement
7. Functions Customized for Various Subjects and Purposes
2
Press 3/4 to select the recording method, and
then press [MENU/SET].
[ON]
[Auto
Shooting]
[OFF]
(Only when [Auto Shooting] is set to [ON])
Sets the interval for automatic recording. A value between 1 and
[Shooting
60 seconds can be set in 1 second intervals.
Interval]
Press 2/1 to select the recording interval (seconds), press 3/4
to set it, and press [MENU/SET].
3
Press 3/4 to select [Start] and then press [MENU/SET].
4
Press 3/4 to select [New] and then press [MENU/SET].
5
Press the shutter button fully.
•
Up to 9999 frames can be recorded.
6
Move the subject to decide on the composition.
•
Repeat recording in the same way.
•
If this unit is turned off while recording, a message for
resuming the recording is displayed when the camera is
turned on. Selecting [Yes] allows you to continue the
recording from the interruption point.
Recording materials skillfully
•
The recording screen displays up to two pictures taken previously. Use them as
reference for the amount of movement.
•
Pressing [(] allows you to check recorded pictures.
Unnecessary pictures can be deleted by pressing [
Pressing [(] again will return you to the recording screen.
7
Touch [
] to end the recording.
•
It can also be ended by selecting [Stop Motion
Animation] from the [Rec] menu and then pressing
[MENU/SET].
•
When [Auto Shooting] is set to [ON], select [End] on the
confirmation screen.
(If [Pause] has been selected, press the shutter button
fully to resume the recording.)
•
Confirmation screen is displayed. It is ended when [Yes] is selected.
•
Confirmation screen for creating a motion picture is displayed next, so select [Yes].
Takes pictures automatically at a set recording interval.
When the shutter button is pressed fully, recording starts.
This is for taking pictures manually, frame by frame.
181
].
30
Advertisement
Table of Contents
