Data Process Menu - KoamTac KDC100 User Manual

Data Process Menu

Wedge/Store - The KDC provides five modes of data transmission in keyboard wedging mode.
• Wedge Only: Barcode data is NOT stored in memory but transmitted to the host.
• Wedge & Store Only: Barcode data is stored in memory and transmitted to the host.
• Store Only: Barcode data is stored in memory but NOT transmitted to the host.
• Wedge & Store if Sent: If data transmission is successful, barcode data is stored in memory.
• Wedge & Store if Not Sent: If data transmission is NOT successful, barcode data is stored in
memory.
Data Format - The KDC provides two data formats, Barcode Only and Packet Data.
Barcode Only: KDC transmits scanned barcodes only. User may incorporate proper data
transmission error detection and correction mechanism in this mode.
KDC supports various termination
characters for barcode only format.
User can select <NONE>, <CR>, <LF>,
<CR+LF> or <TAB> as the termination character.
Packet Data: KDC transmits packet data with checksum to minimize transmission errors.
KTSync
If you are using KTSync
Handshake - KDC provides Handshake mode when Data Format is set to Packet Data.
Handshake Mode will increase the reliability of barcode data transmission.
The default mode for Handshake is Disabled.
Data transmission speed is slower when Handshake Mode is Enabled.
Terminator – KDC supports various termination characters when the Data Format mode is set to
Barcode Only. This option allows you to select <NONE>, <CR>, <LF>, <CR+LF>, or
<TAB> as the termination character. The default terminator is <CR+LF>.
®
operates in Packet Data mode ONLY.
®,
Data Format mode must be set to Packet Data.
16
KDC100 User Manual