Assembly Instructions - Teleco FlatSat Easy Smart 50 Installation Manual And User's Manual

1) On the roof of the vehicle, choose a free area large enough to allow the antenna to
revolve (Fig. 2).
2) Clean the roof carefully in the area the OUTSIDE UNIT is to be installed in.
3) Remembering that the OUTSIDE UNIT must be fastened as shown on Fig. 3, position
the base plate as shown on Fig. 4, with the short side towards the driving direction
of the vehicle.
Driving direction
of the vehicle
Driving direction
of the vehicle
5

Assembly instructions

Driving direction
of the vehicle
Flat Sat Easy Smart 50 - 90 cm
Flat Sat Easy Smart 65 - 140 cm
Flat Sat Easy Smart 85 - 160 cm