Personalize The Greeting; Accessing The Answering System - Uniden XDECT 8355 Series Owner's Manual

Personalize the Greeting

Your personal outgoing message or greeting can be from 2 to 30 seconds
long. If you don't record a greeting, the system uses a pre-recorded
greeting: Hello, no one is available to take your call. Please leave a
message after the tone.
To...
Record your personal
outgoing message or
greeting
Switch between the
pre-recorded greeting
& your own greeting
Delete your greeting

Accessing the Answering System

When the phone's in standby, you can access the system from any
handset; however, only 1 handset can access the system at a time. During
remote access:
• If you do nothing for 30 seconds, the phone returns to standby.
• During message playback, you can press the number key shown next to
each command instead of scrolling through the screens.
42
Follow these steps
1. Open the menu with the phone in standby.
Select Ans.Setup, then Record Greeting.
2. Press MENU/SELECT to start recording. Wait
until the system says "Record greeting" before
speaking.
3. Press MENU/SELECT to stop recording. The
system plays back your new greeting and
save it.
1. Open the menu with the phone in standby.
Select Ans. Setup, then Greeting Options.
2. The system plays back the current greeting.
Press MENU/SELECT to switch greetings.
1. Switch to your personal greeting following the
steps above.
2. While the system is playing back your
greeting, press END/CLEAR on the handset
or DELETE on the base.