When The Operation Is Unstable; Restarting Operation; Data To Be Stored / Data To Be Deleted - Cateye Stealth 10 CC-GL10 Instruction Manual

From "Entering the total distance" (page 24)
Selecting the speed unit
Select the speed unit (km/h or m/h).
Changing
the settings
MODE
(press & hold)
MODE
Register
the setting
MENU
To "Clock setting" (page 22)
km/h ↔ m/h
MODE

When the operation is unstable

When the computer displays incorrectly, perform the restarting operation to stabilize the
operation.
* Performing the restarting operation deletes any records under measurement.
* We recommend that you perform the resetting operation to generate the trip data, before
performing the restarting operation.

Restarting operation

Press the AC button on the back of the computer.
All screen items will light up for 2 seconds, and the unit will change
to the GPS search screen.
AC AC

Data to be stored / data to be deleted

Data to be stored / deleted upon the restarting operation are as follows.
Data to be stored
Speed unit
Clock setting
(time zone, previous time zone, daylight saving
time, and display format)
Night-time setting
(start time and end time)
Record interval
Total distance (*1)
Trip data generated upon the resetting operation
*1 Once you perform the restarting operation before the resetting operation after measure-
ment, the distance is not added to the total distance.
GPS search screen
Data to be deleted
Data under measurement
(elapsed time, trip distance, trip dis-
tance-2, average speed, maximum
speed, and GPS route information)
25