How To Install The Unit On Your Bicycle; Attach The Bracket To The Stem Or Handlebar; Remove/Install The Computer - Cateye Stealth 10 CC-GL10 Instruction Manual

How to install the unit on your bicycle

Watch video
(YouTube)

Attach the bracket to the stem or handlebar

The FlexTight™ bracket can be attached to either the stem or the handlebar, depending on
how the bracket fits into the bracket band.
Caution: Be sure to tighten the dial of the FlexTight™ bracket by hand.
Tightening it strongly using a tool, etc. may damage the screw thread.
When attaching the FlexTight™ bracket to the stem
Bracket band
Bracket
When attaching the FlexTight™ bracket to the handlebar
* To receive GPS signal effectively, adjust the direction of the bracket so that the computer
display faces to the sky.
Bracket band
Bracket
Click the button, then a browser will open and a
video will be played back.
Bracket
Stem
rubber pad
Handlebar
Bracket
rubber pad
Dial
Cut the excess length of the band using scissors.
Caution:
* To mount the bracket to an aero-shaped handlebar or larger stem, use the optional nylon
ties bracket.

Remove/Install the computer

Caution: When removing, hold the unit to prevent it from falling.
Dial
Round off the cut edge of the bracket strap to prevent
injury.
Click
4