Test Operation - Cateye VELO WIRELESS+ Instruction Manual

Mounting the computer
4
Adjust the speed sensor and the magnet
The magnet passes through
the speed sensor zone.
Magnet
* The magnet may be mounted at any position on spoke as long as attachment
conditions are satisfied.
5
Attach/detach computer
6

Test operation

After attaching the computer, rotate the front wheel gently to check that current
speed is displayed on the computer.
If the speed is not displayed, refer to the attachment conditions in steps 1, 2, and 4
again.
Sensor zone
Speed sensor
Click
4
The clearance between the
speed sensor and the magnet
is within 5 mm (3/16").
Magnet
(3/16")
Hold computer.
Push out so that front lifts up.
1
Speed
2
sensor
3
4
SET