Functions Available On The Measurement Screen; Starting/Stopping Measurement; Switching Computer Function - Cateye Stealth 10 CC-GL10 Instruction Manual

Functions available on the measurement screen

Starting/Stopping measurement

Caution: Press and hold the MODE button to reset the computer before and after
measurement.
Measuring starts by resetting the computer. The unit keeps recording the
trip until it is reset. Turn off the unit when not in use.
When the GPS signal receiving icon (
the unit starts/stops measurement in sync with the
bicycle motion.
Starts measurement Stops measurement

Switching computer function

Pressing the MODE button switches the measurement data in the lower display, in the order
shown in the figure.
MODE
Tm Dst
: Elapsed Time
0:00' 00" - 9:59' 59" 0.00 - 999.99 km [mile]
MODE
MODE
Odo Mx
: Total Distance
0.0 - 9999.9 / 0.0 (3.0) - 105.9 km/h
10000 - 99999 km[mile] [0.0 (2.0) - 65.9 m/h]
*1: When Tm exceeds about 27 hours, or Dst exceeds 999.99 km, Average Speed cannot
be measured, while displaying ".E". Reset the data.
GPS signal
) lights up,
receiving icon
Current speed
0.0 (3.0) - 105.9 km/h
[0.0 (2.0) - 65.9 m/h]
Clock
0:00 - 23:59
[AM1:00 - PM12:59]
Selected data
MODE
Dst 2
: Trip Distance : Trip Distance-2
0.00 - 999.99 /
1000.0 - 9999.9 km [mile]
MODE
Av
: Average Speed (*1)
: Maximum Speed
0.0 - 105.9 km/h
[0.0 - 65.9 m/h]
Backlight
When using it during night-time, the backlight always lights up.
Example: Setting of the night-time: 7:00 PM to 6:00 AM
PM 6:59
* The night-time can be set to your needs.
For information on how to set the night-time, see "Changing the computer configuration" (page 20).
* As default, it is set to 7:00 PM to 6:00 AM.
MODE
PM 7:00 – AM 5:59
A backlight is turned on automatically
AM 6:00
9