Table of Contents
Advertisement
FREQUENTLY
Q: How long will my Aquathin SOFT & CLEAN resin
last before it needs to be replaced?
A: You can expect resin life of 10 to 13 years, when
properly regenerated.
Q: What should I do if my softener fails to regenerate?
A: This could occur if your electrical service was inter-
rupted or if you experienced power failure. You need to
make sure that the power connection is functioning and
then reset the "Time of Day" on your unit to the current
local time. If this does not solve the problem, then con-
tact your local AQUATHIN Dealer to replace your timer.
Q: What should I do if my softener delivers hard water?
A: You should check four things:
1) The bypass valve should be closed
2) Make sure the salt level is above the water
level in the salt tank—and that the salt is up to
the indicated "FULL" level.
3) The hot water tank of your water heater
should be flushed frequently as well.
4) Make sure that the distribution tube is not
cracked—check the o-ring and tube pilot.
If these do not solve the problem then you should contact
your local AQUATHIN Dealer, who can identify the
problem and recommend solutions.
28
© 2007-2013 Aquathin Corporation. All rights reserved.
ASKED
QUE STIONS
Advertisement
Table of Contents
