Add Salt To Salt Tank; Set Regeneration Knob - Aquathin ASC25K/F Getting Started

For calculating the number of
gallons, you may use the follow-
ing formula described below:
The model ASC45K has a
45,000 grains capacity. If your
source water has 25 grains per
gallon (gpg), then the gallon
capacity will be:
45,000 grains capacity / 25 gpg
= 1,800 gallons capacity.
In this case, align the white dot
and the number "18" on the gallons wheel to the black
arrow, as shown in figure
Consult your local Aquathin Dealer for confirmation of
this setting and for water hardness testing.
3. Adding Salt to the Salt
Tank
Add salt to the salt tank up to the
level marked "FULL" on the out-
side of the tank. See figure
Use only Water Softener Salt.
4. Setting the Regeneration
Knob
Manually advance the control
knob to the "regeneration" posi-
tion and allow the control to return to the "in service"
position automatically (approximately 90 minutes). Do
not use household water until cycles are completed. This
will allow the resin tank to purge all air.
20 © 2007-2013 Aquathin Corporation. All rights reserved.
Fig. 21. Align black
arrow, white dot and
number of gallons (18
in this case)
21.
22.
FULL
Fig. 22. Fill salt until
the "FULL" level
marked on the salt
tank