Table of Contents
Advertisement
day" indicator
shows the cur-
rent local time
(i.e. if it is 2 pm
your time, the
"time of day"
indicator should
point to "2p")
When you re-
lease the gear,
check for firm
engagement of
the setting
(indicated by a
clicking sound).
Next, the hardness must be set; this allows the unit to
monitor the system automatically and the system regener-
ates only when necessary.
2) For typical residential application, refer to
and take the following steps in order to set the hardness:
Rotate the pro-
gram wheel so
that the white
dot on the wheel
is aligned to the
black arrow
Lift and rotate
the gallons
wheel so that the
number of gal-
lons is aligned
with the black
arrow and white
dot.
Check for firm engagement at setting.
19
© 2007-2013 Aquathin Corporation. All rights reserved.
b. Rotate gear
a. Push button
c. Time of day
2 p
Fig. 19. (a) push the red button,
(b) rotate the gear which is behind
the regeneration knob
(c) rotate the gear till the time
shown is the same as your local
time
figure 20
a. Rotate program wheel
b. Lift and rotate
gallons wheel
Fig. 20. (a) rotate program wheel to
align white dot with black arrow,
(b) lift and rotate gallons wheel to
align gallons with black arrow
Advertisement
Table of Contents
