Checking The Ink Volume; Machine Information; Checking The Serial Number; Packing And Shipping The Machine - Brother MFC-6890CDW User Manual

Checking the ink volume

Although an ink volume icon appears on the
LCD, you can use the ink menu to see a large
graph showing the ink that is left in each
cartridge.
a
Press .
b
Press Ink Volume.
The LCD shows the ink volume.
c
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
Printing and Faxing for Macintosh
Software User's Guide on the CD-ROM.)

Machine Information

Checking the serial number

You can see the machine's serial number on
the LCD.
a
Press MENU.
b
Press a or b to display Machine Info.
c
Press Machine Info.
d
Press Stop/Exit.
174
Packing and shipping
B
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
properly pack your machine. Damage caused
to your machine during transit is not covered
by your warranty.
It is important to allow the machine to
'park' the print head after a print job. Listen
carefully to the machine before
unplugging it to make sure that all
®
or mechanical noise has stopped. Not
allowing the machine to finish this parking
®
in the
process may lead to print problems and
possible damage to the print head.
a
Open the ink cartridge cover.
B
b
Press the lock release lever to release
the ink cartridge and take out all the ink
B
cartridges. (See Replacing the ink
cartridges on page 165.)
c
Install the green protective part and then
close the ink cartridge cover.
IMPORTANT
B