Cleaning The Scanner Glass - Brother MFC-6890CDW User Manual

a
Pull the paper trays (1) completely out of
the machine.
b
Wipe the outside of the machine with a
soft cloth to remove dust.
c
Remove anything that is stuck inside the
paper tray.
d
Wipe the paper trays with a soft cloth to
remove dust.
e
Put the paper trays firmly back in the
machine.
Troubleshooting and Routine Maintenance

Cleaning the scanner glass

a
Lift the document cover (1). Clean the
scanner glass (2) and the white
1
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
3
1
2
b
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a lint-free
cloth moistened with a non-flammable
glass cleaner.
1
2
Note
In addition to cleaning the glass strip with
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
1
B
B
169