Brother MFC-6890CDW User Manual page 170

Error Message
No Paper Fed
No Response/Busy
Not Registered
Out of Memory
158
Cause
The machine is out of paper or
paper is not properly loaded in the
paper tray.
The paper is jammed in the
machine.
The outer rear cover or inner rear
cover may not be closed properly.
The number you dialled does not
answer or is busy.
You tried to access a One Touch
or Speed Dial number that is not
programmed.
The machine's memory is full.
The memory card or USB flash
memory drive you are using does
not have enough free space to
scan the documents.
Action
Do one of the following:
Refill the paper in the paper tray, and
then press Mono Start or
Colour Start.
Remove the paper and load it again
and then press Mono Start or
Colour Start.
Remove the jammed paper by following
the steps in Printer jam or paper jam
on page 162.
If you see this error often when making a
duplex copy or duplex print, the paper feed
rollers may be stained with ink. Clean the
paper feed rollers. (See Cleaning the
paper feed roller on page 170.)
Open the outer rear cover and inner rear
cover. Then close the inner rear cover and
outer rear cover. Make sure they are
closed properly.
Verify the number and try again.
Set up the One Touch or Speed Dial
number. (See Storing One Touch Dial
numbers on page 77 and Storing
Speed Dial numbers on page 79.)
Fax sending or copy operation in
progress
Do one of the following:
Press Stop/Exit and wait until the other
operations in progress finish and then
try again.
Clear the data in the memory. To gain
extra memory, you can turn off Memory
Receive. (See Turning off Memory
Receive Operations on page 57.)
Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 54.)
Delete unused files from your memory card
or USB Flash memory drive to make some
free space and then try again.