General Setup; Power Save Mode; Putting Your Machine In Power Save Mode; Bringing Your Machine Out Of Power Save Mode - Brother MFC-6890CDW User Manual

3

General setup

Power Save mode

To maintain print quality, prolong print head
life, and provide the best ink cartridge
economy, you should keep your machine
connected to the power at all times.
You can put the machine into Power Save
mode by pressing the Power Save key. You
can still receive telephone calls in Power
Save mode. For further information on
receiving faxes in the Power Save condition,
please see the table on page 28. The delayed
faxes that have been set up will be sent. You
can even retrieve faxes using Remote
Retrieval if you are away from your machine.
If you want to do other operations, you must
take the machine out of Power Save mode.
Note
If you have connected an external
telephone or TAD, it is always available.
Putting your machine in
Power Save mode
a
Press and hold down the Power Save
key until the LCD shows
Shutting Down.
The LCD will stay on for a few seconds
before going off.
Bringing your machine out of
3
Power Save mode
a
Press the Power Save key.
The LCD shows the date and time.
Note
• Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
• You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available. (See
Power Save setting on page 27.)

Power Save setting

You can customize the machine's
Power Save key. The factory setting is
Fax Receive:On. Your machine can
receive faxes or calls even when the machine
is in Power Save mode. If you do not want
your machine to receive faxes or calls, turn
this setting to Fax Receive:Off.
3
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display
P.Save Setting.
e
Press P.Save Setting.
f
Press Fax Receive:Off (or
Fax Receive:On).
3
3
3
3
27