SunStar KM-250 Series User Manual page 5

1-1) Machine
mobilization
Danger
1-2) Machine
installation
Caution
1-3) Troubleshooting
Danger
Only personnel with a full understanding of the safety rules should move the machines.
The following directions must be observed when delivering the machines.
At least two or more people should move the machine.
Before delivering the machine, thoroughly wipe off the oil on the machine to
prevent accidents.
Physical damages such as functional difficulties or breakdowns may occur
depending on installation conditions of the machines. Be sure to heed the following
conditions.
Remove the packing from top to bottom. Watch out for nails on the wooden box.
Install a climate controller and clean it regularly to prevent dust and moisture build-
up from contaminating and corroding the machines.
Keep the machines away from direct sunlight.
Keep a minimum distance of 50cm between the machine at both sides and
backside and the wall to secure sufficient space for repair.
Do not operate the machine near areas with danger of explosion. Refrain from
running the machine in the vicinity of risky places, e.g., where a large quantity of
aerosol-spraying products or oxygen are handled, unless specific guarantees are
given otherwise for the operation of the machine to prevent explosion at such
places.
The user should install an illuminator in the work area for the machine does not
come supplied with any lighting apparatus due to the specific features of the
machine.
[Note] Details of the machine installation are laid out in No. 2 Installation.
When the machine is in need of repair, only our authorized service technicians must
handle it.
Before cleaning and repairing the machine, shut off the power supply and wait four
minutes for the machine to discharge completely.
No part of the machine or specifications may be modified without prior consultation
with our company. Any such modification could risk safe operation of the machine.
In case of repair, replace only with standard OEM parts from SunStar.
After repair, put safety covers back on the machine.
Keystone Sewing Machine Company, Inc.
5