Sony VPL-VW1100ES Operating Instructions Manual page 48

Panel Alignment
Network Setting
48
Set the amount to adjust with </, buttons for the horizontal
direction (H direction) and with M/m buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing .
Reset: Returns to the factory settings.
Notes
• Depending on the adjustments made above, colors may become
uneven or the resolution may change.
• Depending on the "Zone" adjustment value, "Shift" adjustment
may not be available.
Perform internet protocol settings.
Set this when accessing from a computer (1 page 50).
IP Address Setup: Select the IP address setting method.
Auto (DHCP): The IP address is assigned automatically from the
DHCP server such as a router.
Manual: Specify the IP address manually.
When "Manual" is selected for "IP Address Setup," select the item
with the </, buttons and input the value with the M/m buttons.
When all items are entered, select "Apply," and then press the
button. The entered settings will be registered.
IP Address: Set the unit's IP address. (1.0.0.0 – 223.255.255.255)
Subnet Mask: Set the unit's subnet mask. (1.0.0.0 –
255.255.255.255)
Default Gateway: Set the unit's default gateway. (1.0.0.0 –
223.255.255.255)
Primary DNS: Set the primary DNS server. (1.0.0.0 –
223.255.255.255)
Secondary DNS: Set the secondary DNS server. (1.0.0.0 –
223.255.255.255)
MAC Address: Display the unit's MAC address. This cannot be
changed.