Sony VPL-VW1100ES Operating Instructions Manual page 44

HDMI Setting
HDMI Dynamic Range
Auto Input Search
44
PJ Auto Power On: Select whether to link the power of the unit to
the Control for HDMI compatible equipment.
When set to "On," the power of the unit will automatically turn on
when the power of the connected equipment is turned on or when
making operations such as playback.
Tip
To enable this function, set "Standby Mode" (1 page 40) on the
Setup menu to "Standard," and then set "PJ Auto Power On" to
"On." For details, see "About the Control for HDMI" (1 page 55).
Device List: Lists all the Control for HDMI compatible equipment
connected to the unit.
When "Enable" is selected, the Control for HDMI setting of Sony
equipment (AV amplifier, video, etc.), which is compatible with
"Control for HDMI - Easy Setting,"* will also be effective.
* "Control for HDMI - Easy Setting" is a function that makes the
Control for HDMI setting of equipment connected to HDMI input
of the unit effective as well when the Control for HDMI setting of
the unit is effective. Non-Sony equipment is not compatible.
Sets the video input level for HDMI 1 and HDMI 2 connectors.
Auto: Sets the video input level automatically.
Limited: The video input level is set for signals of 16-235.
Full: The video input level is set for signals of 0-255.
Note
If the video output setting of the connected HDMI device is not set
correctly, light and dark parts of the video may appear too light or
too dark.
Enables selection from only the input which has a signal.
When set to "On," inputs without signals do not appear on the input
palette that appears when you press INPUT. To display all inputs, set
this to "Off" (1 page 17).