Sony VPL-VW1000ES Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projector
  5. VPL-VW1000ES
  6. Operating instructions manual
Sony VPL-VW1000ES Operating Instructions Manual

Sony VPL-VW1000ES Operating Instructions Manual

Projectors: front projector
Hide thumbs Also See for VPL-VW1000ES:
Table of Contents

Advertisement

Quick Links

4-414-629-11 (2)
Video Projector

Operating Instructions

Before operating the unit, please read this manual thoroughly and retain it for
future reference.
VPL-VW1000ES
© 2011 Sony Corporation
Printed in Japan

Advertisement

Table of Contents
loading

Related Manuals for Sony VPL-VW1000ES

Summary of Contents for Sony VPL-VW1000ES

  • Page 1: Operating Instructions

    4-414-629-11 (2) Video Projector Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. VPL-VW1000ES © 2011 Sony Corporation Printed in Japan...
  • Page 2 For the customers in Canada This Class B digital apparatus complies with Canadian ICES-003. For the customers in Europe The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
  • Page 3 Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Pour les clients en Europe Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japon. Le représentant autorisé pour EMC et la sécurité...
  • Page 4 Ao fim da vida útil do equipamento, disponha-o em um ponto de coleta na Rede Autorizada Sony ou nas lojas Sony, de forma a garantir o tratamento adequadoda bateria. Note on use of the USB charging AC power adaptor AC-UD10 For the customer in the U.S.A.

  • Page 5: Table Of Contents

    Table of Contents Precautions ...7 Location of Controls Front/Right Side ...8 Rear/Bottom ...9 Remote Control ...10 Connections and Preparations Unpacking ...11 Inserting the Batteries into the Remote Control ...11 Connecting the AC Power Cord ...12 Preparation 1: Installing the Unit ...13 Before Setting Up the Unit ...13 Notes on Use ...14 Installing the Unit ...16...
  • Page 6 Projection Distance and Lens Shift Range ... 86 Dimensions ... 90 Index ... 93 Trademark Information “PS3” is a registered trademark of Sony Computer Entertainment Inc. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

  • Page 7: Precautions

    Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further.

  • Page 8: Location Of Controls

    Location of Controls Front/Right Side You can use the buttons on the control panel with the same names as those on the remote control to operate the unit. Control panel LENS button (1 page 17) M/m/</, (arrow)/ (enter) button (1 page 39) MENU button (1 page 39) INPUT button (1 page 27) (ON/STANDBY) button (1 page 18)

  • Page 9: Rear/Bottom

    Rear/Bottom Lamp cover (1 page 73) Remote control detector (1 page 17) Ventilation holes (exhaust) (1 page 14) AC IN socket (1 page 12) AC inlet cover (supplied) For details on how to attach the AC inlet cover, see page 12. Adjusters (1 page 21) Ventilation holes (intake) (1 page 14)

  • Page 10: Remote Control

    Remote Control LIGHT button Illuminates the buttons on the remote control. CALIBRATED PRESET buttons (1 page 37) POSITION button (1 page 32) MOTION ENHANCER button (1 page 42) ASPECT button (1 page 34) COLOR SPACE button (1 page 46) COLOR TEMP button (1 page 43) GAMMA CORRECTION button (1 page 45)

  • Page 11: Connections And Preparations

    • USB charging AC power adaptor (1) • AC power cord for USB charging AC power adaptor (1) • USB charging cable (GPHK05 - 2010 - 0007/SONY) (1.2 m) (1) • ImageDirector3 CD-ROM (1) • Operating Instructions (this manual) (1) Inserting the...

  • Page 12: Connecting The Ac Power Cord

    VORSICHT Explosionsgefahr bei Verwendung falscher Batterien. Batterien nur durch den vom Hersteller empfohlenen oder einen gleichwertigen Typ ersetzen. Wenn Sie die Batterie entsorgen, müssen Sie die Gesetze der jeweiligen Region und des jeweiligen Landes befolgen. Installing batteries Two size AA (R6) batteries are supplied for Remote Control.

  • Page 13: Preparation 1: Installing The Unit

    Preparation 1: Installing the Unit The lens shift allows you to have broader options for placing the unit and viewing pictures easily. Before Setting Up the Unit Unsuitable installation Do not place the unit in the following situations, which may cause malfunction or damage to the unit.

  • Page 14: Notes On Use

    Notes on Use Do not do any of the following while using the unit. Blocking the ventilation holes (intake or exhaust) Ventilation holes (exhaust) Ventilation holes (intake) For details on the location of the ventilation holes (intake or exhaust), see “Location of Controls”...
  • Page 15 WARNING When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.

  • Page 16: Installing The Unit

    Do not mount the projector on the ceiling or move it by yourself. Be sure to consult with qualified Sony personnel (charged). To dealers Use the Sony PSS-H10 Projector Suspension Support, and take measures to prevent falling using wire, etc. For details, refer to the installation manual for dealers of the PSS-H10.

  • Page 17: Preparation 2: Adjusting The Picture Position

    Preparation 2: Adjusting the Picture Position Project an image on the screen and then adjust the picture position. Remote control detector Tips • The (ON/STANDBY), INPUT, MENU, and M/m/</,/ panel of the unit function the same as those on the remote control. The LENS button functions in the same way as the LENS ADJUSTMENT (FOCUS, ZOOM, SHIFT) buttons of the remote control.
  • Page 18 After connecting the AC power cord to the unit, plug the AC power cord into a wall outlet. The ON/STANDBY indicator lights in red and the unit goes into standby mode. Lights in red. Press the (ON/STANDBY) button to turn on the unit. The lens protector will open.
  • Page 19 Adjust the picture position. Press the LENS ADJUSTMENT (SHIFT) button to display the Lens Shift adjustment window (test pattern). Then adjust to the proper position of the picture by pressing the M/m/</, buttons. The test pattern disappears when no operation has been performed for one minute.

  • Page 20: To Adjust The Horizontal Position

    To adjust the horizontal position Press </,. The picture projected on the screen moves right or left by a maximum of 31% of the screen width from the center of the lens. 1 screen width To adjust the vertical position Press M/m.
  • Page 21 Note The range to move the picture projected on the screen can be adjusted only within the octagon area illustrated below. For details, see “Projection Distance and Lens Shift Range” (1 page 86). Range of movement of the projected picture 0.8V Projected Picture 0.31H...

  • Page 22: Preparation 3: Connecting The Unit

    (1 page 53) and “About the Control for AV amplifier Equipment with HDMI output connectors HDMI cable (not supplied) When using an optional HDMI cable, be sure to use a Sony HDMI cable or other cable that has the HDMI logo. Speakers to HDMI output...

  • Page 23: To Connect To Equipment With Component Video Output Connectors

    Notes • Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed properly. • When connecting an HDMI cable to the unit, make sure the input of the unit and the mark on the connector of the cable is set at the same position.

  • Page 24: Connecting To A Computer

    When using an optional HDMI cable, be sure to use a Sony HDMI cable or other cable that has the HDMI logo. mark on the upper part of the HDMI input of...

  • Page 25: Connecting To A 3D Sync Transmitter

    Connecting to a 3D Sync Transmitter This unit incorporates a 3D Sync Transmitter. Depending on the installation environment of the unit, the 3D glasses may not receive 3D signals properly from the unit’s built-in 3D Sync Transmitter. In this case, connect an optional TMR-PJ1 3D Sync Transmitter and place it near your viewing position.

  • Page 26: Preparation 4: Selecting The Menu Language

    Preparation 4: Selecting the Menu Language You can select one of 16 languages for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. 2,3,4 M/m/</, (arrow)/...

  • Page 27: Projecting

    Projecting This section describes how to operate the unit to view the picture from the equipment connected to the unit. It also describes how to adjust the quality of the picture to suit your taste. Projecting the Picture Power on both the unit and the equipment connected to the unit.

  • Page 28: Turning Off The Power

    Turning Off the Power Press the (ON/STANDBY) button. A message “POWER OFF?” appears on the screen. Press the (ON/STANDBY) button again before the message disappears. The lens protector will close. Be careful not to catch your fingers or any objects. The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat.

  • Page 29: Using The 3D Glasses

    • You can watch 3D video images only when signals from HDMI input. When connecting 3D equipment such as a 3D game or 3D Blu- ray Disc player to the unit, use an HDMI cable. • There are differences in perception of 3D video images among individuals.
  • Page 30 3D glasses communication range Figures A and B below indicate the communication range of the 3D glasses. If you try to watch 3D video images from a distance greater than the communication range or install the unit outside the communication range, the 3D glasses may not be able to display the images properly.

  • Page 31: Charging The 3D Glasses

    Charging the 3D Glasses Use the provided USB charging AC power adaptor to charge your 3D glasses. Caution Connect the USB charging cable supplied with the unit, to the supplied USB charging AC power adaptor only. Using any other connector may cause fire, a rise in temperature or damage to the cable and glasses.

  • Page 32: Using The Picture Position

    Cleaning • Clean the unit with a soft, dry cloth. If the unit is very dirty, wipe it off with a soft cloth lightly moistened with a mild detergent solution, and then wipe with a soft dry cloth. • Do not use any type of solvent such as alcohol, thinner, or benzine as it may damage the finish of the cabinet.
  • Page 33 Image of the lens moving In the example below, the images with aspect ratio of 1.78:1 (16:9) and 2.35:1 are projected on a 2.35:1 screen. When a 1.78:1 (16:9) image is input When a 2.35:1 image is input Press the POSITION button.

  • Page 34: Selecting The Aspect Ratio According To The Video Signal

    Selecting the Aspect Ratio According to the Video Signal You can select an aspect ratio best suited for the video signal received. ASPECT button Original image 1.85:1 Squeezed 1.85:1 2.35:1 Squeezed 2.35:1 Press ASPECT. Each time you press the button, you can select the “Aspect”...
  • Page 35 Original image Recommended setting and resultant images Normal 1.78:1 (16:9) 1.33:1 (4:3) 1.33:1 (4:3) with side panels Stretch Squeezed V Stretch 2.35:1 When using an anamorphic lens...
  • Page 36 Original image 16:9 Notes • Selectable aspect modes vary depending on the input signal. • The aspect cannot be selected for an input signal from a computer, or when preset memory number 96 (1 page 80) signal is input. Notes on switching the “Aspect” setting •...

  • Page 37: Selecting The Picture Viewing Mode

    Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of video source or room conditions. You can save and use different preset modes for 2D/3D respectively. Press one of the CALIBRATED PRESET buttons. CALIBRATED PRESET buttons Setting items...

  • Page 38: Using The Supplied Software To Adjust The Picture Quality (Imagedirector3)

    Using the Supplied Software to Adjust the Picture Quality (ImageDirector3) By using the “ImageDirector3” (supplied as a CD-ROM), you can make the desired gamma correction from a computer connected to the unit. Connect the REMOTE connector of the unit with a computer and start-up “ImageDirector3” on the computer. For details on how to use the “ImageDirector3,”...

  • Page 39: Using The Menus

    Using the Menus This section describes how to make various adjustments and settings using the menus. Operation through the Menus The unit is equipped with an on-screen menu for making various adjustments and settings. If you select an item name followed by an arrow (B), the next menu window with setting items appears.
  • Page 40 Setting menu Adjustment menu Next menu window Setting items Make the setting or adjustment of an item. When changing the adjustment level To increase the value, press M/,. To decrease the value, press m/<. Press to store the setting and restore the original menu screen.

  • Page 41: Picture Menu

    Picture Menu The Picture menu is used for adjusting the picture. Note These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (1 pages 82 to 85 ). Item names in brackets represent those printed on the remote control. Calib.
  • Page 42 Reality Creation Adjusts the detail and noise processing of images. (Super-resolution [REALITY CREATION] function) On: Applies detail and noise processing effects. Resolution: When you increase the setting value, the texture and detail of the picture become sharper. Noise Filtering: When you increase the setting value, the noise (picture roughness) becomes less prominent.
  • Page 43 Brightness Adjusts the brightness of the picture. [BRIGHTNESS] The higher the setting, the brighter the picture. The lower the setting, the darker the picture. You can make adjustments by pressing the BRIGHTNESS +/– on the remote control. Color Adjusts the color density. The higher the setting, the greater the intensity.
  • Page 44 Expert Setting NR (Noise Reduction) Reduces the roughness or noise of the picture. Usually, use to select “Off.” If the picture is rough or noisy, select a setting from among “Low,” “Middle” or “High” according to the input signal source. MPEG NR (MPEG Noise Reduction) Reduces block noise and mosquito noise, in particular in digital signals.
  • Page 45 Expert Setting Gamma Correction [GAMMA CORRECTION] Adjusts the response characteristics of the tone of the picture. Select a favorite tone from 10 options. 1.8: 2.6: Gamma 7: Brightens dark areas in the picture, and expands gradation expression. Gamma 8: Produces a picture with contrast emphasized slightly. Gamma 9: Produces a picture with contrast emphasized more than with Gamma 8.
  • Page 46 Expert Setting Color Space [COLOR SPACE] Converts the color space. BT.709: An ITU-R BT.709 color space, which is used for high- definition television broadcast or Blu-ray Disc. The color space is equivalent to sRGB. DCI: A color space based on the DCI specification (1 page 66). Adobe RGB: An approximated Adobe RGB color space, which has a wider range of color reproduction than sRGB, and suited for displaying an image recorded in Adobe RGB specification.

  • Page 47: Screen Menu

    Screen Menu You can set the input signal, picture size, aspect mode, etc. Note These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (1 pages 82 to 85). Item names in brackets represent those printed on the remote control.
  • Page 48 Aspect You can set the aspect ratio of the picture to be displayed for the [ASPECT] current input signal (1 page 34). This item is enabled only when a video signal (preset memory numbers 3 to 14 and 93 to 95) (1 page 79) is input.
  • Page 49 Adjust Signal You can adjust the input signal setting. Phase: Adjusts the pixel/signal phase of an analog computer input signal. Adjusts the picture to the point where it looks clearest. Pitch: Adjusts the horizontal picture size of an analog computer input signal.

  • Page 50: Setup Menu

    Setup Menu The Setup menu is used to change the factory preset settings, etc. Status Sets whether or not the on-screen display is displayed. Set to “Off” to turn off the on-screen displays except for certain menus, message when turning off the power, and warning messages. Language Selects the language used in the menu and on-screen displays.
  • Page 51 Lamp Setting When replacing the lamps, set the desired lamp setting (1 page 75).

  • Page 52: Function Menu

    Function Menu The Function menu is used for changing the settings of the various functions of the unit. 3D Settings You can change the settings of the 3D function. 2D-3D Display Sel.: For Switching the video images to “2D” or 3D Format: Set the 3D system when the input HDMI signals do not “3D.”...
  • Page 53 When set to “On,” the following are available. • The operation of the unit and the connected Control for HDMI • The Control for HDMI setting of Sony equipment (AV Device Auto Power Off: Sets whether to also turn the power of the connected Control for HDMI compatible equipment off when you turn the power of the unit off.
  • Page 54 You can select “Black” or “Blue.” connected to the unit. When “Enable” is selected, the Control for HDMI setting of Sony equipment (AV amplifier, video, etc.), which is compatible with “Control for HDMI - Easy Setting,”* will also be effective.

  • Page 55: Installation Menu

    Installation Menu The Installation menu is used for changing the installation settings. Image Flip Flips the picture on the screen horizontally and/or vertically. HV: Flips the picture horizontally and vertically. H: Flips the picture horizontally. V: Flips the picture vertically. Off: The picture does not flip.
  • Page 56 Blanking This feature allows you to adjust the displayable region within the four directions of the screen. Select the edge to adjust by highlighting Left, Right, Top, or Bottom using the M/m buttons. Adjust the amount of blanking using the </, buttons. Depending on the aspect ratio setting, right/left blanking may not be available.
  • Page 57 Panel Alignment This feature allows you to adjust the gaps in the color of characters or the picture. When set to “On,” “Adjust Color” and “Pattern Color” can be assigned and adjusted. Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments.
  • Page 58 Network Setting Perform internet protocol settings. Set this when accessing from a computer (1 page 60) or using the supplied gamma control adjustment software “ImageDirector3.” IP Address Setup: Select the IP address setting method. When “Manual” is selected for “IP Address Setup,” select the item with the </, buttons and input the value with the M/m buttons.

  • Page 59: Information Menu

    No. 20 1080/24p Frame packing 1234 H Lamp Timer Model name Displays the model name (VPL-VW1000ES). Serial No. Displays the serial number. fH (horizontal frequency) Displays the horizontal frequency of the input signal. fV (vertical frequency) Displays the vertical frequency of the input signal.

  • Page 60: Using Network Features

    Using Network Features Connection to the network allows you to operate the following features: • Checking the current status of the unit via a Web browser. • Remotely controlling the unit via a Web browser. • Receiving the e-mail report for the unit. •...

  • Page 61: Displaying The Control Window Of The Unit With A Web Browser

    Displaying the Control Window of the Unit with a Web Browser Connect the LAN cable. LAN cable (straight type) (not supplied) LAN Connector Hub, router, etc. CAUTION For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port.

  • Page 62: Operating The Control Window

    When you change the password, input a new password after deleting the password (*****) that was set. Note If you forget your password, consult with qualified Sony personnel. Confirming the Information Regarding the Unit You can confirm the current settings for the unit on the Information page.

  • Page 63: Using The E-Mail Report Function

    Using the E-mail Report Function Set the e-mail report function on the Setup page. Entered values will not be applied unless you click on [Apply]. Click on [Owner information] to enter the owner information recorded in the e-mail report. Owner information button Set the timing of the e-mail report.
  • Page 64 SMTP Authentication: Check this check box to arrange for SMTP authentication to be performed before sending e-mail. Account Name: Enter the mail account. Password: Enter the password. Confirm the contents of the e- mail report. When you click on [View], the contents of the e-mail report are displayed.

  • Page 65: Others

    Control for HDMI compatible equipment such as a hard disk Blu-ray Disc player, a DVD player/recorder, an AV amplifier, etc. to a Sony Control for HDMI compatible TV or a projector with an HDMI cable, the equipment connected will synchronize with the TV or the projector when either is operated.

  • Page 66: About Dci Specification

    Sony Corporation. • xvYCC is an international standard of the technical specifications of the extended- gamut color space for video signals. The...

  • Page 67: Troubleshooting

    Troubleshooting If the unit appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy c The power may not turn on if you turn the power off with The power is not turned on.
  • Page 68 “On” (1 page 50). When the ON/STANDBY indicator blinks in green, the unit is starting up. Wait until it stops blinking and remains lit in green. Consult with your local dealer or qualified Sony personnel. page 54). (1 page 11).
  • Page 69 3D video images Symptom Cause and Remedy c Check if the 3D glasses are turned on (1 page 29). The video image does not c Make sure that the battery in the 3D glasses is charged. seem like 3D video images. c Check if the input source is HDMI.

  • Page 70: Warning Indicators

    (A repetition rate of 3 c If the symptom persists, the lamp may be at the end of its service flashes) c The fan is broken. Consult with qualified Sony personnel. ON/STANDBY flashes in red. (A repetition rate of 4 flashes) c The internal temperature is unusually high.

  • Page 71: Message Lists

    Note When a warning indicator other than the above starts flashing, and the symptom persists even after carrying out the above methods, consult with qualified Sony personnel. Message Lists Warning messages Message Cause and Remedy c Turn off the power.

  • Page 72: Caution Messages

    Caution messages Message Cause and Remedy c No signal is input in the selected input. Check connections c Press the appropriate button. Not applicable! c The operation to be activated by the button is currently (1 page 22). prohibited.

  • Page 73: Replacing The Lamp And Cleaning The Ventilation Holes (Intake)

    Replacing the Lamp and Cleaning the Ventilation Holes (intake) The lamp used for the light source has a certain lifespan. When the lamp dims, the color balance of the picture becomes strange, or “Please replace the Lamp.” appears on the screen, the lamp may be exhausted.
  • Page 74 Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. Handle Note Hold the lamp by the handle to remove and attach it. Push in the new lamp by the handle securely until it reaches the end, and then tighten the 3 screws.
  • Page 75 Turn on the unit, then select the desired setting item on the Setup menu. The menu screen below will be appeared. Select “Yes.” Caution Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire.

  • Page 76: Cleaning And The Screen Of The Projector

    Cleaning and the Screen of the Projector Cleaning the cabinet • To remove dust from the cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution. •...

  • Page 77: Specifications

    Specifications System Display system SXRD panel, projection system Display device Size of effective display area 0.74-inch (18.8 mm) SXRD Number of pixels 26,542,080 pixels (8,847,360 pixels × 3) Projection lens 2.1 times zoom lens (motorized) f=21.3 mm to 46.2 mm F2.9 to F3.9 Light source Ultra High Pressure Lamp 330 W type...

  • Page 78: Optional Accessories

    USB charging cable (GPHK05 - 2010 - 0007/SONY) (1.2 m) (1) Câble de charge USB (GPHK05 - 2010 - 0007/ SONY) (1,2 m) (1) CD-ROM (ImageDirector3) (1)

  • Page 79: Preset Signals

    Preset Signals The following table shows the signals and video formats which you can project using this unit. When a signal other than the preset signal shown below is input, the picture may not be displayed properly. Memory Preset signal (resolution) 480/60i 480/60i...
  • Page 80 Memory Preset signal (resolution) 640 × 480 VESA 60 VESA 72 VESA 75 (IBM M3) VESA 85 (IBM M4) 800 × 600 VESA 56 VESA 60 VESA 72 VESA 75 (IBM M5) VESA 85 1024 × 768 VESA 60 VESA 70 VESA 75 1280 ×...
  • Page 81 Preset memory numbers for each input signal Analog signal Signal Component signal (Y P Computer signal (INPUT A connector) Digital signal Signal Component signal (HDMI 1, 2 connectors) Video GBR signal (HDMI 1, 2 connectors) Computer signal (HDMI 1, 2 connectors) * Some digital signals input from computers may be displayed as preset memory number of Component or Video GBR signal.

  • Page 82: Input Signals And Adjustable/Setting Items

    Input Signals and Adjustable/Setting Items The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted are not displayed in the menu. Picture menu Item Component signal Reality Creation Advanced Iris Lamp Control...
  • Page 83 Item Component signal Color Correction Clear White x.v.Color Color Space : Adjustable/can be set – : Not adjustable/cannot be set Screen menu Item Component signal Aspect (excluding preset memory number 96) Over Scan (excluding preset memory numbers 93 to Phase Pitch Shift z : Adjustable/can be set...

  • Page 84: Compatible 3D Signals

    Compatible 3D Signals This unit accepts the following types of 3D signals. Resolution 3D signal format 720/60, 50P Side-by-Side format Over-Under format* Frame packing* 1080/60, 50i Side-by-Side format* 1080/24P Over-Under format* Frame packing* 1080/60, 50P Side-by-Side format Over-Under format *: Mandatory 3D format of the HDMI standards. 3D Signals and Adjustable/Setting Items Some items on the menus may not be available to adjust/set, depending on the 3D signals.
  • Page 85 When the unit is set to convert 2D video images to 3D video images, some items on the menus may be not available to adjust/set, depending on the “3D Format” settings on the Function menu. The items that cannot be adjusted are not displayed on the menu. The following tables indicate these items.

  • Page 86: Projection Distance And Lens Shift Range

    Projection Distance and Lens Shift Range The projection distance refers to the distance between the front of the lens and the projected surface. Projection distance L Projected image The lens shift range represents the distance in percent (%) by which the lens can be shifted from the center of the projected image.
  • Page 87 When projecting in 1.90:1 (Native Full Display 17:9) format 1.90 Projection distance Projection image size Diagonal 80" (2.03 m) 100" (2.54 m) 120" (3.05 m) 150" (3.81 m) 200" (5.08 m) Projection distance formula D: Projected image size (Diagonal) Projection distance L (minimal length) L=0.028860 ×...
  • Page 88 When projecting in 1.78:1 (16:9) format 1.78 Video display area Projection area Projection distance Projection image size Diagonal 80" (2.03 m) 100" (2.54 m) 120" (3.05 m) 150" (3.81 m) 200" (5.08 m) Projection distance formula D: Projected image size (Diagonal) Projection distance L (minimal length) L=0.030333 ×...
  • Page 89 When projecting in 2.35:1 format 2.35 Video display area Projection area Projection distance Projection image size Diagonal 80" (2.03 m) 100" (2.54 m) 120" (3.05 m) 150" (3.81 m) 200" (5.08 m) Projection distance formula D: Projected image size (Diagonal) Projection distance L (minimal length) L=0.030024 ×...

  • Page 90: Dimensions

    Dimensions Front Bottom Front of the cabinet 150 (6) 171.3 (6 520 (20 260 (10 260 (10 150.6 (6) 563.5 (22 640 (25 Unit: mm (inches) Center of the lens Unit: mm (inches) 18.1 (...
  • Page 91 Do not mount the projector on the ceiling or move it by yourself. Be sure to consult with qualified Sony personnel (charged). To dealers Use the Sony PSS-H10 Projector Suspension Support, and take measures to prevent falling using wire, etc. For details, refer to the installation manual for dealers of the PSS-H10.

  • Page 92: Side View

    Side view Front of the cabinet Top view Front of the cabinet 241.9 (9 130 (5 286.9 (11 353.1 (14) 640 (25 241.9 (9 130 (5 Upper ceiling 286.9 (11 mount bracket Center of the supporting pole (The center of the supporting pole is different from that of the unit.) Unit: mm (inches) Unit: mm (inches)

  • Page 93: Index

    Index Numerics 3D Glasses 3D glasses communication range ...30 Using the 3D Glasses ...29 3D Settings 2D-3D Display Sel..52 3D Brightness ...53 3D Depth Adjust ...53 3D Format ...52 Simulated 3D Effect ...53 Acceptable 3D Signals ...84 Adjust Signal Phase ...49 Pitch ...49 Shift ...49...
  • Page 94 Location of Controls Front/Right side ... 8 Rear/Bottom ... 9 Menu Function ... 52 Information ... 59 Installation ... 55 Picture ... 41 Screen ... 47 Setup ... 50 Messages Caution ... 72 Warning ... 71 Motion Enhancer ... 42 Motionflow ...

Table of Contents