Table of Contents
Advertisement
PAUSE/EXE/INC button
This buttons conbines three functions:
A. PAUSE button if the printer is in the Ready status. By pressing the PAUSE button:
(1) the printer stops at the completion of printing of the current media, (2)
the On-Line LED flashes, and (3) the printer holds all data in memory. This
allows for trouble-free replacement of media stock and thermal transfer ribbon. A
second depression of the PAUSE button will restart the printer.
B. EXE/INC button if in Setup mode. Press EXE/INC button to increase the value of
parameters or execute the selected item.
FEED/DEC button
This button also has dual functions: Feed one medium row and decrease the value of
parameters.
Press the FEED button, the printer will advance one medium row.
Press the DEC button to change parameter settings or exit the submenu.
Print head lift lever
When opening the Print Head Lift Lever, On-Line LED is off, the LCD display shows
"Carriage Open". After engage the print head lift lever, press the FEED button, printer
will re-register the media then show READY on the LCD display and the screen will
return to ready condition.
Ribbon tension adjustment knob
The ribbon tension adjustment knob offers six settings to suit different widths of
ribbon. Turning the knob clockwise from 0 to 5 tightens the ribbon. A light click is
audible between settings. A louder click indicates setting 1. Factory setting is 5.
Print head pressure adjustment knob
Each print head pressure adjustment knob has 5 settings to allow for different media
reel widths. For a 50 mm or narrower reel, the left hand setting may need to be
increased and the right hand decreased, while for a 100 mm wide reel, both knobs
should have the same setting. Factory setting is 5 on each knob.
7
Advertisement
Table of Contents
