Table of Contents
Advertisement
3.5 Dump mode
To enter dump mode, press MENU button to scroll the cursor to "Printer Test" then press
EXE button to enter the submenu. Press MENU button to scroll dump mode. Press EXE
button to select line dump mode or page dump mode. Press MENU button to select
EXIT to enter dump mode. In this mode, any character sent from the host computer will
be printed in two columns, as shown in Figure 11.
In the left hand column are the characters received and in the right hand columns are the
corresponding hexadecimal values. This is very helpful to users for the verification of
programming commands or debugging of printer programs. Reset the printer by pressing
the FEED button.
ASCII data
Abbildung 11. Ausdruck im Übergabe-Modus
Figure 11. Printout of dump mode
13
Hexadecimal data related to
left column of ASCII data
Advertisement
Table of Contents
