Fixing Problems; Contact Partner In The Case Of Problems; Troubleshooting; Caring For Your Telephone - Siemens HiPath 4000 OpenStage 10 T Operating Instructions Manual

Table of Contents

Advertisement

Fixing problems

Contact partner in the case of problems

In the case of faults that continue for more than 5 minutes, for example, con-
tact your service personnel.

Troubleshooting

Pressed key does not respond:
Check if the key is stuck.
Telephone does not ring:
Check whether the "Do not disturb" function is activated on your telephone
(
page 56). If so, deactivate it.
You cannot dial an external number:
Check whether your telephone is locked.
If the phone is locked, unlock it
To correct any other problems:
First contact the relevant service personnel. If the service personnel are
unable to correct the problem, they must contact Customer Service.

Caring for your telephone

Never allow the telephone to come into contact with coloring, oily or
aggressive agents.
Always use a damp or antistatic cloth to clean the telephone. Never
use a dry cloth.
If the telephone is very dirty, clean it with a diluted neutral cleaner con-
taining surfactants, such as a dish detergent. Afterwards remove all
traces of the cleaner with a damp cloth (using water only).
Never use aggressive or alcohol-based cleansers on plastic parts. The
use of scouring agents is also forbidden.
page 55.
Fixing problems
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 4000Openstage 10 t

Table of Contents